PTFE Release Agent 1

Aerosols: Bulk Liquid:

MS-122AD A0305B

MS-122AX A1229B

MS-122RB MS-143XD

MS-122XD MS-143E

MS-143H

To select the most suitable product for your application, please call our Technical Service Department ( 8am - 4pm Eastern Time ) at 800.992.2424 or 203.743.4447. In Canada, please call 800.323.4621.

PTFE MOLD RELEASE APPLICATIONS

This new generation of Release Agents/Dry Lubricants feature a smaller particle size of the PTFE (average particle size is 3.7 microns) for better adhesion to the substrate. Various formulations are available to provide the desired drying rates.

These release agents can be used to mold plastics, rubbers, resins, acrylics, epoxies, urethanes, nylons, phenolics, polycarbonates, polystyrene and elastomers. Air-dried coatings typically provide 8 to 10 releases between applications. We have a new aerosol formulation, MS-122AX and a new non-aerosol, A1229B that contain proprietary additives to provide even more releases between applications. The transfer of PTFE to molded parts is negligible, minimizing interference with post finishing operations. These PTFE Release Agents/Dry Lubricants with PTFE of smaller particle size, use the magic of DuPont Teflon® chemistry to create suspensions of low molecular weight polytetrafluoroethylene (PTFE). Designed to give multiple releases. Recommended for applications to molds to 212ºF/100ºC; mold can then be heated to 500ºF/260ºC. No discernable transfer or migration. No silicones.

Aerosols	Bulk Liquid (Qt, Gal, 5G, 55G)	Release Agent On Metal Molds	Release Agent On Non-metallic Molds	Release Agent On Rubber Molds
MS-122AD	A0305B	Recommended	Recommended	Highly Recommended
MS-122AX	A1229B	Highly Recommended	Recommended	Not Recommended
MS-122RB		Recommended	Recommended	Not Recommended
MS-122XD	MS-143XD	Recommended	Recommended	Recommended
	MS-143E	Recommended	Recommended	Recommended
	MS-143H	Highly Recommended	Recommended	Highly Recommended

For Preheated Molds above 212ºF/100ºC, use MS-136W (aerosol) or MS-145W (bulk liquid) Release Agent.

Note: We also offer custom formulations for different spray patterns and drying times.

For PTFE DRY LUBRICANT APPLICATIONS

Click Here