ReleaSys DF | Non-Silicone Mold Release Agent
Advanced DryFilm Technology, Superior Release Ease, No Transfer or Post-Molding Cleaning
ReleaSys™ DF is a solvent-based, dryfilm mold release agent designed to provide superior surface adhesion and wear resistance. Miller-Stephenson’s exclusive surface activation technology allows for unmatched durability and maximal releases per application. Utilization of a proprietary fluoropolymer, this non-silicone mold release agent does not transfer and will not contribute to any cross contamination pitfalls typically seen with silicone release agents. ReleaSys™ DF is particularly effective for cold molding operations which require high slip, instant cure, and rapid output. The product is ideally suited for molding epoxies, specifically in potting and casting operations and thermoplastics. ReleaSys™ DF will not interfere with post-production finishing operation. Benefits of this product include:
- DryFilm Release System
- Surface Activation Technology
- No interference will post-molding operations
- Ideal for Epoxies, Plastics, and Composites
- Clean, Non-oily, Non-migrating
- Non-Silicone, Non-wax
Miller-Stephenson has been developing non-silicone mold release agent for over 40 years. Our Fluoropolymer class of release agent yields a uniform, dry film on the mold surface while also offering superior surface adhesion and durability. Utilization of specialized PTFE polymers, ReleaSys DF typically can last numerous molding cycles before re-application is necessary, and is ideal for compression and transfer molding operations. One drawback is its relatively poor performance in injection molding, which requires surface slip that dry films cannot achieve.
Optimized Performance, Simple Application, Immediate Improvement in Molding Efficiency
ReleaSys DF performs well in releasing all commonly-known molding resins, including, but not limited to; polyester, vinyl ester, DCPD, phenolic, epoxy and BMI. ReleaSys DF is easy to apply and forms an opaque/white, inert release film on the mold surface that protects the mold surface from contamination and surface defects. ReleaSys DF non-silicone mold release agent forms a micro-thin film on the mold surface such that, even with multiple touch-up cycles, the product will not produce any appreciable build-up. The release film is extremely durable and will generate multiple releases, even when molding with the most chemically aggressive resin systems. The release film has very high heat tolerance, known to withstand temperatures in excess of 500°F. For easier application without the need for specialty equipment our ReleaSys DFX is our aerosol variant of this potent coating technology
50+ years of Industry Expertise at your service
Miller-Stephenson has had a long history in numerous molding industries, and our ReleaSys brand of products are respected around the world for quality and reliability. When you purchase Miller-Stephenson ReleaSys Semi-Permanent mold release agents you not only get industry leading products, you also gain access to our many years of direct production floor experience. We understand your production issues and can help you optimize your mold preparation, maintenance and release processes to improve your bottom line.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.