High-Temperature Release Agents

Filter

Showing all 8 results

High-Temperature Release Agents

- SELECT A CATEGORY BELOW
ReleaSys HTX-WBN is superior boron nitride coating offer excellent performance for metal, plastic, and glass molding
Quick View

High-Temperature Release Agents

Boron Nitride Coatings | ReleaSys™ HTX-WBN

ReleaSys™ HT is a specialized, water-based release agent specifically designed for high temperature molding operations.  This formula utilizes a proprietary boron nitride complex to achieve unmatched lubricity and mold release performance. The inert and non-wetting nature of ReleaSys™ HT makes it an excellent surface coating for molds used to produce castings of light metals such as magnesium and for coating surfaces in glass making operations. Advantages include:

  • Water-based; VOC-free formula
  • Enhanced surface adhesion and durability
  • Protects Mold and Die Surfaces
  • High Temperature Stability up to 1562°F (850°C) in air

MORE INFO

ReleaSys HTX-D is the most advanced Die Casting Lubricant available
Quick View

High-Temperature Release Agents

Die Casting Lubricants | ReleaSys™ HTX-D

ReleaSys™ HTX-D Die Casting Lubricants is Miller-Stephenson's most advanced coating for the die casting industry, engineered to enhanced your production throughput and gain efficiency.  The advanced coating chemistry and innovative water-based formulation helps to serve manufacturers by producing ultra-thin, highly lubricious coatings resulting in smooth, clean release without the need for post-molding cleaning.  Due to the high efficiency of ReleaSys™ HTX-D and need for only thin coats, mold service life and surface quality are maximized while also providing the highest cost-efficiency available

  • Superior Water-based, Thin Film Coatings
  • Unmatched Lubrication and Release Ease
  • Extended Mold Service Life
  • Consistent, Reliable, and Clean Demoulding
  • Ideal for High Pressure and Small Dimensional Casting

MORE INFO

Glass Mold Release ReleaSys™ HTX.
Quick View

High-Temperature Release Agents

Glass Mold Release | ReleaSys™ HTX

ReleaSys™ HTX Glass Mold Release is a ultra high performance ceramic coating designed to provide superior adhesion to mold surfaces, allowing numerous high temperature castings of glass, metals, and other substrates without the need for frequent mold re-coating. Our product forms a uniform, thin film on surfaces, binding tenacious to metallic and non-metallic surfaces. Our advanced chemistry provides both a low temperature and high temperature binder system allowing use on a broad spectrum of substrates and heating capabilities. Benefits include

  • High Temperature Stability up to 1000 °C in air
  • Unmatched durability and surface adhesion
  • High lubricity; Low coefficient of friction
  • Ultra-Thin, Dry-Film Coating
  • 100% water-based formulation

MORE INFO

ReleaSys HTX-G Graphite Release Agent offer superior dry lubrication and release
Quick View

High-Temperature Release Agents

Graphite Release Agent | ReleaSys™ HTX-G

ReleaSys™ HTX-G Graphite Release Agent is a next generation, graphite based release coating that develops thin dry films with superior nonstick and lubricity properties. ReleaSys™ HTX-G is typically used in high temperature casting and molding operations, specifically where clean, efficient release properties are needed without the normal messy, dusty nature of lesser graphite base release systems.

  • Superior Anti-Stick and Barrier Properties
  • Excellent Surface Lubricity and Mold Release
  • Ideal for Metals, Glass, Ceramics, and Casting Dies
  • Functional from room temperature up to 850°C
  • Ultra Fast Drying, Dry Lubricant Coating

MORE INFO

ReleaSys HTX30-GR high temp release coating offer superior barrier and release
Quick View

High-Temperature Release Agents

High Temp Release Coating | ReleaSys™ HTX30-GR

ReleaSys HTX30-GR is Miller-Stephenson's top-of-the-line high temperature coating, superior to both the ReleaSys HTX-A and ReleaSys HTX.  This water-based coating utilizes our proprietary blend of highly lubricious ceramic particles and next-generation, ultra-high temperature binder system to deliver unmatched release performance from room temperature up to 1000°C. This coat has been shown to provide numerous releases of molten aluminium and magnesium, glass, and highly abrasive plastic composites such as PEEK from a single application. We achieved a coating which outperforms all other water-based or solvent-based boron nitride or graphite coatings.

  • Miller-Stephenson Next-Generation Binder System
  • Highly lubricious ceramic coating; Extreme abrasion resistance
  • Optimized for high temperature, abrasive environments
  • Exceptional release ease with no transfer
  • Rapid drying and short cure times
  • Ultra-low VOC, water-based formulation
  • Environmentally-friendly

MORE INFO

ReleaSys HTF high temperature mold release coatings offer excellent release of complex composites
Quick View

High-Temperature Release Agents

High-Temperature Mold Release | ReleaSys™ HTF

ReleaSys™ HTF is a highly advanced, water-based release agent designed to exhibit exceptional release of all substrates from room temperature up to 750° F. This product develops a highly lubricious and dry film on the mold surface, offering extended reapplication intervals and no costly transfer. Designed to meet the demands of the advanced composite and elastomer manufacturing industries, this high temperature mold release utilizes sophisticated fluoropolymer technology.

  • Exceptional Lubricity and Ease of Release
  • Ideal for Advanced Composites and Elastomers
  • Heat Stable to 750 ° F
  • Numerous Releases per Application
  • Water-based; No VOC; no odor

MORE INFO

Boron Nitride Release Agent
Quick View

High-Temperature Release Agents

ReleaSys™ HTX-A | Boron Nitride Release Agent

ReleaSys HTX-A is Miller-Stephenson's most advanced and refined boron nitride release agent available in an aerosol formulation. ReleaSys HTX-A utilizes advanced boron nitride and ceramic technology to delivery outstanding performance in glass molding, aluminum extrusion / forming, and other high temperature application. Can withstand temperatures up to 1000 C without complex cure programs or applications.

  • Optimized for High Temperature, Abrasive environments
  • Ideal for Glass, Metal, and Barrier Applications
  • Exceptional release ease with no transfer
  • Rapid Drying and Cure times (no heat curing required)
  • 100% non-flammable aerosol formulation

MORE INFO

ReleaSys™ HTX-L High temperature release agent
Quick View

High-Temperature Release Agents

ReleaSys™ HTX-L | High Temperature Release Agent

Miller-Stephenson has developed a non-flammable, high temperature release agent specifically designed for specialty plastic, elastomer, and composite molding and/or dry film lubrication applications. Utilizing a proprietary boron nitride-complex and binder system, Miller-Stephenson's ReleaSys™ HTX-L generates a ultra-thin, lubricious coating with superior durability, release properties, and lubricity with zero transfer to your molded item. Benefits include:

  • Ideal for high temperature plastics, elastomers, and composites
  • Prevents sticking of die and molds
  • Protects Surfaces like MAG/MIG welding nozzles
  • Effective mold release up to 800°C / 1562°F
  • Non-wetting; Non-reactive

MORE INFO

High-Temperature Release Agents - ABOUT

Hi-Temp Release Agents
Miller-Stephenson High-Temp Release Agents offers efficient and effective release solutions for molding operations which operate at temperatures exceeding 1562°F / 842°C, such as lights metals or glass molding. Fine particle, hexagonal boron nitride is utilized to impart a low coefficient of friction and temperature stability for these high temperature molding process. Stable in aggressive environments with excellent barrier properties, our boron nitride release system is ideal for all of your high temperature composite, metal, and glass mold requirements. Our High-Temp Release Agents are particularly effective for use in advanced, high temperature composite resins, rubbers / elastomers,  and is also an ideal for die-casting of low melting point metals such as lead. Moreover our specialized release agents are an effective protectant for MAG and MIG welding nozzles while not effecting the quality of the welds. Miller-Stephenson formulations allow the creation of a dry film lubricant that provides the exceptional properties of boron nitride or fluoropolymers in an easy-to-use package that delivers protection of your mold surface,  low electrical conduction, high thermal conduction, prevention of reactions between materials, and superior release.