PTFE release agent

Showing all 4 results

PTFE Bulk Liquid (MS-143)

MS-143TE | PTFE Mold Release Agents

MS-143TE was developed as an efficient, economical and universal release agent. This formulation is a nonflammable, non-ozone depleting release agent/dry lubricant, containing a suspension of low-molecular PTFE (polytetrafluoroethylene) fluoropolymers.  As a dry lubricant, MS-143TE minimizes “slip-stick” and is ideal for low speed, light load applications. MS-143TE offers the following benefits:

  • Enhanced release agent durability/adhesion
  • Efficient and consistent release of molded parts
  • Outstanding lubricity (low coefficient of friction)
  • Nonflammable, Non-ozone depleting formulation
  • Non-migrating; Non-staining

MORE INFO

Miller-Stephenson's PTFE release agent is a water-based formulation which utilizes sub 1.0 micron PTFE (polytetrafluoroethylene) particles to impart superior lubricity, surface adhesion and durability, and outstanding mold release efficiency. The outstanding lubricity and extremely low coefficient of friction of this water based PTFE has been optimized for hot mold application (>190 F / 88 C). The formulation has been further enhanced with proprietary surface activation chemistry to increase adhesion of the PTFE to the molding surface.  The result is a water-based release agent that is very cost-effective by maximizing releases per application and decreasing down-time. Benefits of this product include:

  • Water-based formulation; Hot mold optimized
  • Enhanced surface adhesion; Maximized durability
  • Excellent release of all polymer types
  • Non-flammable; No VOC; No GWP

MORE INFO

ReleaSys™ 8200 is a water-based, semi-permanent dry film release agents designed to provide reliable, consistent release across a broad range of moldable substrates. Excels at compression and transfer molding.  Properly applied, our product develops a durable, thin-film on the mold surface with minimal mold build-up.  ReleaSys 8200 will not interfere with post-production finishing operation. Benefits of this product include:

  • High durability; Surface activation chemistry
  • Ideal for Silicone-based molding
  • Ideal for Rubber to Metal Bonding
  • Thermally Stable (>550°F)
  • Clean, Non-oily, Non-migrating

MORE INFO

ReleaSys™ DF is a solvent-based, dryfilm mold release agent designed to provide superior surface adhesion and wear resistance. Miller-Stephenson’s exclusive surface activation technology allows for unmatched durability and maximal releases per application. Utilization of a proprietary fluoropolymer, this non-silicone mold release agent does not transfer and will not contribute to any cross contamination pitfalls typically seen with silicone release agents. ReleaSys™ DF is particularly effective for cold molding operations which require high slip, instant cure, and rapid output. The product is ideally suited for molding epoxies, composites, and thermoplastics. Benefits include:

  • DryFilm Release System
  • No interference will post-molding operations
  • Ideal for Epoxies, Plastics, and Composites
  • Clean, Non-oily, Non-migrating
  • Non-Silicone, Non-wax
 

MORE INFO