Submit Quote
Plastic Mold Release Agent | ReleaSys™ 7300
$105.00 – $140.00
Semi-permanent, plastic mold release agent designed for superior mold release for all plastics and thermoforming applications. Excellent plastic flow out, zero transfer, and fast curing.
- Excellent Release Performance
- 100% water-based, zero VOC
- Products are Paintable, bondable, & require no cleaning
- Multiple Releases from a Single Application
- Seal Molds Surfaces to Enhance Resin Flow
Plastic Mold Release Agent | ReleaSys™ 7300
Ideal of all Plastic Mold Release Applications; Designed for Rapid, High Output Molding Operations
ReleaSys™ 7300 Plastic Mold Release Agent is a semi permanent release agent designed to provide reliable, consistent performance in all plastic molding applications. ReleaSys 7300 is a water based, zero VOC coating that balances the performance, ease of use, and worker safety. Properly applied, our product develops a durable, thin-film on the mold surface with minimal to zero build up. ReleaSys 7300 binds tenaciously to the mold surface to provide extended application intervals mold surfaces. Overall ReleaSys™ 7300 is very effective on all plastic compound as well as urethanes and composites
Benefits of ReleaSys™ 7300 Plastic Mold Release Agent
- Excellent Release Performance
- Products are Paintable, bondable, require no cleaning
- Multiple Releases from a Single Application
- Seal Molds Surfaces to Enhance Resin Flow
- Instant Cure & Thin Release Films
- Clean; Non-oily; Non-migrating
- Ideal for deep draw or difficult mold configurations
Applications for Plastic Mold Release Agents
ReleaSys™ 7300 was developed as a plastic release agent offering optimized cycle times, consistent surface finish, and reliable release performance. Applications include:
- Intricate or Difficult Mold Configurations
- High Temperature Polycarbonate, PEEK, or Fluoropolymers
- Acrylics, HDPE, LDPE, and PVC
- High Speed Injection Molding Systems
- Blow Molding or 3D printing
Miller-Stephenson is an excellent partner to help develop and grow your plastic molding operation. ReleaSys focuses on combining cost effectiveness, reliability, and ease of use ReleaSys™ 7300 provides optimized resin flow – resulting in lower scrap rates and shorter cycles times, low release agent usage rate – lowering your operational cost, and non-silicone ingredients – minimizing any downstream complications.
Protection of your Mold Surface, Decrease Scrap Rates, Improved Part Quality
ReleaSys™ 7300 Thermoplastic mold release agent binds and protects your mold surface both during and after the molding process, eliminating embedding of molding material into the pores of your mold. This barrier allows your plastics to flow and cure without worry of any fusion onto the mold surface, protecting your expensive mold investment. Our release system is non-sacrificial, meaning it tenaciously adheres to the mold surface, providing the protection and ease of release your mold requires, cycle after cycle.
50+ years of Industry Expertise at your service
Miller-Stephenson has had a long history in the molding industry, our ReleaSys™ brand of products are respected around the world for their quality and reliability. When you purchase a Miller-Stephenson ReleaSys plastic mold release agent you not only get industry leading products, you also gain access to our many years of direct production floor experience. We understand your production issues and can help you optimize your mold preparation, maintenance and release processes to improve your bottom line. Our product expertise in polyurethane mold release agents ensure we recommend the right product for your specific challenges – guaranteed.
For help with application or troubleshooting concerns while using ReleaSys.
Click here for information, Which mold release agent is right for you
For further reading regarding our ReleaSys product line and Applications – our most helpful article for selecting the best product for your needs
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Physical Properties:
| Primary Polymer | Polysiloxane |
| Appearance | Milky Solution |
| Odor | Alcohol |
| Specific Gravity | 0.88 g/mL |
| Flash Point | < 50 C |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| ReleaSys Sizes | Quart, 1 Gallon |
ReleaSys 7300 TDS
Release Agent Applications:
ReleaSys 7300 is formulated to provide unmatched utility in low temperature compression, injection and transfer molding with the following materials. For help with application or troubleshooting concerns while using ReleaSys.
| • Organic Polymers | • Thermoplastics |
| • Thermosetting resins | • Acrylics |
| • FRP Composites | • Epoxies |
| • Non-gel Polyester | • Polyurethane / TPU |
| • Exothermic Polymers | • Adhesives |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
One Gallon, 5 Gallon, 55 Gallon Drum, 275 Gallon totes
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.