ReleaSys™ 8000 | Plastic Release Agent
Optimized for Plastic Injection Molding, Minimal Re-application, Consistent and Reliable Ejection and Release
ReleaSys™ 8000 Plastic Release Agent is an advanced release system specifically designed for today’s modern plastic injection and gravity molding manufacturers, providing substantial improvements in release coating durability, ultra-thin films, and mold cleanliness. ReleaSys™ 8000, when paired with our ShieldSys™ MX120 Permanent Mold Coating, offers a quantitative improvement in product throughput, minimization of downtime, and consistent and reliable release and ejection throughout the entire production campaign. ReleaSys™ 8000 offers excellent compatibility with nearly all thermoplastic and thermosetting resins and will not cause discoloration, distortion, or transfer onto the molded part. Thanks to Miller-Stephenson’s tireless development work, ReleaSys 8000 (specifically when paired with ShieldSys™ MX120 provides an ultra-thin, non-transferring coating to any mold surface, providing excellent detail and mold surface representation. This allows molded parts to be painted, glued, or bonded without the need for time-consuming post-mold part washing or re-work. Benefits include:
- Advanced Thin-Film Release Coating
- Designed Specifically for Modern Plastic Resin Molding
- Provides extreme durability and minimal reapplication
- Consistent and Reliable Ejection and Release
Standard plastic release agents typically compromise by having excellent properties but will then cause rapid mold fouling or offer excellent cleanliness but cause unpredictable release issues or higher defect rates. ReleaSys 8000 plastic release agent makes zero compromises providing consistent release and exceptional surface quality while providing cleaner and easier to eject molded parts. The advanced thin-film technology and next-generation cross-linking chemistry, our coatings are more efficient, leading to lower application amounts and increased surface lubricity in a non-transferring coating. Lower usage has the added benefit of drastically increasing mold cleanliness and improving surface aesthetics.
ReleaSys™ 8000 – Increased Throughput, Cleaner Operation, Less Downtime – Superior Chemistry, Superior Results.
Whether you are molding polycarbonate, high-density polyethylene, or polyvinylchloride our ReleaSys™ 8000 plastic mold release agent system will provide clean, efficient, and cost-effective release throughout the entire production run. Unlike other plastic mold release agents, ReleaSys utilizes advanced polymer chemistry to form a durable release film which binds tenaciously to mold surfaces allowing numerous mold cycles to be completed without reapplication. Because our coating develops an ultra-thin film with no messy transfer, painting, bonding, and adhesion are not compromised. Plastic products maintain perfect surface characteristics due to enhanced resin flow. Miller-Stephenson prides itself at being at the forefront of mold release chemistry, we offer advanced low odor and low VOC solvent based formulations as well as no VOC waterborne formulations. When combined with our ShieldSys MX120 Permanent Mold Coating, this potent molding ‘kit” will enable your production to make significant strides forward both in production throughput, faster and cleaner production campaigns, and significantly lower scrap rates. Moreover if you are involved in rotational molding of plastics we strongly recommend our ReleaSys™ RM, which is a water-based release system designed for the rotational molders looking to extended their reapplication intervals, improve resin flow-out, and increase throughput.
60+ Plus Years of Experience in the Plastic Industry – at your service.
At Miller-Stephenson, we not only understand the challenges that plastic molding creates for thermoplastic processors, we also recognize the diversity of raw materials utilized in the process. Although injection molding is a common term, each thermoplastic processing operation is unique, and addressing the needs of each processor requires an understanding of that processor’s unique needs. Distinctive, robust, formulated products have been developed to serve your requirements and positively affect the efficiency of your process, the quality of your products and your operational costs. Our ReleaSys plastic release agent products have a long, distinct pedigree in the plastic industry where we have identified key aspect to focus on when optimizing our ReleaSys™ product line: high efficiency rates, precise surface quality requirements and high tooling costs are focal points for Miller-Stephenson’s development of products for the thermoplastic injection molding process.
ReleaSys™ 8000 Plastic Release Agent
Miller-Stephenson has had a long history in numerous molding industries, and our ReleaSys™ brand of products are respected around the world for quality and reliability. When you purchase Miller-Stephenson ReleaSys Semi-Permanent mold release agents you not only get industry leading products, you also gain access to our many years of direct production floor experience. We understand your production issues and can help you optimize your mold preparation, maintenance and release processes to improve your bottom line.
For further reading regarding our ReleaSys product line and Applications – our most helpful article for selecting the best product for your needs
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.