Submit Quote
Mold Release Coating | ReleaSys™ 9800
$88.00 – $175.00
ReleaSys™ 9800 is a high-performance mold release coating utilizing a high crosslinking water-based, semi-permanent mold release system. This formulation forms our most robust and durable coating, offering unmatched adhesion to all molding surfaces. ReleaSys 9800 acts as a sealer and release agent in a single step, maximizing protection of your mold surface and increasing product throughput.
- Tenacious surface adhesion and durability
- Rapid Cure; No heating required
- Ideal for Advanced Composites and Aggressive substrates
- No transfer; Flat-Satin finish
Mold Release Coating | ReleaSys 9800™
Advanced Release Agent Chemistry for Advanced Materials
ReleaSys™ 9800 mold release coating delivery sophisticated technology to today;s modern molding industries with an alternative to the traditional “shop-spray” or high volume, apply-every-cycle release agent. Miller-Stephenson has been at the forefront in developing the most effective products of this type and transitioning industries to these formulations for their molding processes as appropriate. We have focused on taking the message to our customers that “more is not necessarily better” when it comes to applying mold release agents. Today’s highly sophisticated water-based semi-permanent mold release coating technologies do more with less.
Benefits of ReleaSys 9800 Mold Release Coating
- Excels at de-molding advanced composites and aggressive substrates
- Ideal for highly-polished; complex mold
- Tenacious adhesion to all molding surface
- Extended re-application intervals
- Rapid Cure; no heat required
- Minimal build-up and mold fouling
- Eco-friendly Water-based formulation
ReleaSys 9800™ Mold Release Coating – Superior Chemistry, Superior Results
Our unique chemistry provides a mold release which exceeds the rigorous demands of manufacturing today’s advanced composites and substrates. This proprietary chemistry comes in an eco-friendly, no VOC formulation and requires no extended cure times. ReleaSys 9800 mold release coating forms an immediate, tenacious bond to the mold surface upon drying. ReleaSys 9800 provides a simple, yet sophisticated mold release chemistry, designed for all high performance composites used in compression molding, resin transfer, vacuum bagging, filament-winding, mandrel-built, hand and spray layup processes. etc. This robust formulation excels equally well with other forms of molding and materials, and can be used to release more typical substrate such as polyurethane, thermoplastics, rubber/elastomers, and fiberglass. The advanced chemistry within ReleaSys 9800 holds tremendous utility and applicators will see the immediate effects.
- Molded parts can be post-painted or glued with little or no surface preparation
- Decreased cost of scrap and waste.
- Reduced frequency of equipment maintenance and replacement
- Ability to restore and extend the life of your equipment
- Improved mold integrity, surface quality and throughput
- Low product application levels result in a cleaner working environment
Providing Molding Expertise and Innovative Chemistry for over 50 years
Miller-Stephenson experts have spent years focusing on how to improve mold release coatings by increasing efficiency, reducing waste and enhancing finished part quality. We have formulated several specialty mold release agents for just that purpose. As a leader in the development of water-based products, Miller-Stephenson ReleaSys product line offers environmentally conscious technology for composite molders who require the same, uncompromised high levels of quality and performance as found in traditional solvent-based products.
Miller-Stephenson has had a long history in mold release coating industry, pioneering numerous advanced in both solvent and water-based chemistries. The ReleaSys™ brand of products are respected around the world for quality and reliability. When you purchase Miller-Stephenson ReleaSys Semi-Permanent mold release agents you not only get industry leading products, you also gain access to our many years of direct production floor experience. We understand your production issues and can help you optimize your mold preparation, maintenance and release processes to improve your bottom line.
For help with application or troubleshooting concerns while using ReleaSys.
Click here for information, Which mold release agent is right for you
For further reading regarding our ReleaSys product line and Applications – our most helpful article for selecting the best product for your needs
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Physical Properties:
| Primary Polymer | Crosslinking Polysiloxane |
| Appearance | White Emulsion |
| Odor | None |
| Specific Gravity | 1.0 g/mL |
| Flash Point | None |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| ReleaSys Sizes | Quart, 1 Gallon |
ReleaSys 9800
Advanced Composites-ReleaSys 9800
Release Agent Applications:
ReleaSys 9800 is formulated to provide unmatched utility in compression, injection and transfer molding with the following materials. For help with application or troubleshooting concerns while using ReleaSys.
| • Organic Polymers | • Thermoplastics |
| • Thermosetting resins | • Elastomers (Natural and Synthetic) |
| • Fluoroelastomers | • EPDM |
| • Acrylics | • Polyurethane / TPU |
| • Neoprene | • Melamine |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
One Gallon, 5 Gallon, and 55 Gallon Drum
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.