Slightly Higher Molecular Weight BPA Liquid Epoxy As Compared to EPON 828, Very Good Resistance to Crystallization
EPON 830 is a slightly higher molecular weight BPA liquid epoxy as compared to EPON 828. The resin itself is resistant to crystallization and also in blends with HELOXY™ Modifiers. EPON Resin 830 is somewhat higher in viscosity than EPON Resin 828, although the viscosity is still easily handled. It provides greater reactivity when combined with most curing agents.
Application Areas/Suggested Uses
- Industrial floor toppings and grouting
- High build glaze, sealer or gel coats
- General purpose casting and encapsulation
- Base resin for dilution with Heloxy Modifiers
EPON 830 Benefits
- Slightly higher viscosity than standard liquid epoxy
- Very good resistance to crystallization
- Higher reactivity at room temperature
- Low color
- Good chemical resistance
|Weight per Epoxide|
190 – 198
|Viscosity at 25°C|
170 – 225
|Density at 25°C|
EPON 830 liquid epoxy resins when properly formulated and cured provide an inert end-product with a unique combination of properties. They are suitable for use in high performance applications such as coatings, adhesives, civil engineering, electronic and electrical insulation, composites and fiber sizing. Cured EPON resins are generally regarded as being high strength materials, since many commonly used systems provide tensile strengths greater than 10,000 psi and modulus values greater than 400,000 psi. One of the most widely recognized applications of cured EPON Resin 830 is strong adhesion to a broad range of substrates. Such systems exhibit shear strength of up to 6,000 psi (41 Mpa). One factor which contributes to this property is the low shrinkage shown by these systems during cure. Please refer to the MSDS for the most current Safety and Handling information.
Miller-Stephenson is an Epon 830 Supplier and certified from Hexion for direct distribution, technical support, and formulation modifications. . For Technical Service Question please click here
Krytox™ is a trademark of The Chemours Company FC, LLC.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.