Submit Quote
PTFE Water-based Release Agents | ReleaSys™ 8200
$69.87 – $167.34
PTFE Water-based Release Agent. Advanced PTFE Dry Film release agents designed to provide reliable, consistent release across a broad range of moldable substrates. Excels at compression and transfer molding. ReleaSys™ 8200 will not interfere with post-production finishing operation.
- Ideal for Rubbers, Elastomers, & Plastics
- Ideal for Silicone Rubber & LSR
- 100% Silicone & Wax free
- Clean, Non-oily, Non-migrating
PTFE Water-based Release Agents | ReleaSys™ 8200
100% Silicone Free, DryFilm Fluoropolymer Release Agent
ReleaSys™ 8200 is a PTFE Water-based Release Agents, that offers semi permanent performance with a dryfilm release coating. PTFE Water-based Release Agents are designed to provide reliable, consistent release across a broad range of moldable substrates. ReleaSys 8200 excels at compression / transfer molding of rubbers, elastomers and silicone elastomers . Properly applied, our product develops a durable, thin-film on the mold surface with minimal mold build-up. ReleaSys 8200 will not interfere with post production finishing operations and produces products with a matte finish.
Benefits of PTFE Water-Based Release Agents
- High durability; Reliable Release Agent
- Ideal Compression & Transfer Molding or Rubber-to-Metal Bonding Applications
- Ideal of Rubbers, Silicones, and Elastomers
- 100% Silicone Free; Finished products are Paintable
- 100% Water-based, zero VOC
- Chemically inert, thin film release coating
- Clean, Non-oily, Non-migrating
Applications of ReleaSys™ 8200 Water-based Release Agent
ReleaSys 8200 is a semi permanent PTFE water-based release agents designed to provide excellent dry film mold release. PTFE has the lowest coefficient of friction of any release chemistry and generates resilient films on mold surfaces. The applied film has exceptional release and dry lubricant properties for the following applications:
- High Tack or Aggressive Silicone Rubber and RTV
- Rubbers, Elastomers, FKM
- Peroxide-cured EPDM
- Epoxy, Composite, and FRP materials
- Dry Film Lubrication
- Applications Requiring Silicone Free production
ReleaSys 8200 – Application Efficiency; Highly Cost-Effective, 100% Silicone Free
The application efficiency of ReleaSys 8200 can be seen by the relatively small amounts of release agent that needs to be applied to the mold surface to give numerous releases. Despite such small application volumes, mold surfaces are protected and surface imperfections are reduced. ReleaSys Rubber release agents are formulated to provide maximum release ease without build-up. ReleaSys 8200 water-based mold release agent is an excellent all round release system that can be tailored to many types of molding applications. Miller-Stephenson has spent years improving and tailoring our mold release agents to deliver the highest value proposition by increase efficiency, reducing over application, and enhancing finished part quality and consistency.
For help with application or troubleshooting concerns while using ReleaSys.
If you would like more information on which mold release agent is right for you click here
For further reading regarding our ReleaSys product line and Applications – our most helpful article for selecting the best product for your needs
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Physical Properties:
| Primary Polymer | Fluoropolymer |
| Appearance | Light Yellow Emulsion |
| Odor | None |
| Specific Gravity | 1.0 g/mL |
| Flash Point | None |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| ReleaSys Sizes | Quart, 1 Gallon |
ReleaSys8200-TDS
ReleaSys8200-TDS
ReleaSys Product Overview
ReleaSys Product Overview
Release Agent Applications:
ReleaSys 8200 is formulated to provide unmatched utility and economy in compression and transfer molding, particularly with Rubber to Metal bonding. ReleaSys 8200 is compatible with the following materials
| • Plastics | • Elastomers |
| • Fluoroelastomers | • Fluorosilicones |
| • Acrylics | • Epoxy |
| • Nitrile | • SBR |
| • Chlorinated Polyethylene | • Natural and Synthetic Rubber |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
One Gallon, 5 Gallon, and 55 Gallon Drum
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.