Submit Quote
EPON 1001F
EPON™ Resin 1001F is a low molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. EPON Resin 1001F is used for its application or end-use advantages in both structural and surface-coating applications as follows:
- Structural applications: Excellent pre-impregnation properties
- Surface coatings: Toughness, Chemical Resistance, and Durability
- Thermosetting acrylic: Adhesion, Toughness, Detergent Resistance
EPON 1001F
Low Molecular Weight Solid Epoxy Resin Derived From a Liquid Epoxy Resin and Bisphenol-A
EPON 1001F is a low molecular weight solid epoxy resin derived from a liquid epoxy resin and bisphenol-A. Because of these performance properties, amine and polyamide cured coatings are especially useful in maintenance and marine applications. EPON Resin 1001F is used for its application or end-use advantages in both structural and surface-coating applications as follows:
EPON 1001F Structural Applications
Because of the excellent pre-impregnation properties, EPON 1001F is used in:
• Dry lay-up laminates
• Dry filament winding
• Transfer molding compounds
Surface Coatings
Amine or polyamide cured coatings based on EPON Resin 1001F provide excellent:
• Chemical resistance
• Durability
• Toughness
• Adhesion
Thermosetting acrylic- EPON Resin Systems
EPON Resin 1001F is used to upgrade thermosetting acrylic resins into coatings with greatly
improved:
• Adhesion
• Toughness
• Detergent resistance
Because of these specific properties, these systems are used extensively for automotive and appliance primers. Since solutions of this versatile epoxy resin are the preferred products for most of the aforementioned applications, Miller-Stephenson provides solutions of EPON 1001F in several solvents to assist customers in handling this product.
Specifications
| Property | Units | Value | Test Method/Standard |
| Weight per Epoxide | g/eq | 525-550 | ASTM D1652 |
| Viscosity at 25°C | cP | 7.0-9.6 | ASTM D445 |
| Color | Pt-Co | 200 | ASTM D1209 |
EPON 1001F Typical Properties
| Property | Units | Value | Test Method/Standard |
| Viscosity, Melt, @ 150 °C | 600-750 | ASTM D445-79 | |
| Esterification equivalent weight1 | 145 | ||
| Weight per gallon @ 68 °F | lbs | 10.2 | |
| Flash Point, Setaflash | >200 °F | ASTM D3278 | |
| Bulk density | lbs/ft3 | 36-40 | |
| Melting Point | °C | 75-80 | ASTM D3461 |
| Hydroxyl content | 0.29 | Calculated value | |
| Sodium content | ppm | 0-2 | HC-692A |
Identification and Classification
Chemical Abstract Service Registry Number: 25036-25-3 (EPA/TSCA inventory designation)
MSDS Number: 184-04
Chemical Designations:
• 2.2-bis(p-glycidyloxyphenyl) propane condensation product with 2.2-bis(p-hydroxyphenyl)
propane and similar isomers.
• Phenol. 4.4’-(1-methylethylidene)bis-polymer with 2.2’-[(1-methylethylidene)bis-(4.1-
phenyleneoxymethylene)]bis(oxirane).
Structural formula, base resin:
Miller-Stephenson is an Epon 1001F Supplier and certified from Hexion for direct distribution, technical support, and formulation modifications. For Technical Service Question please click here
Krytox™ is a trademark of The Chemours Company FC, LLC.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
EPON 1001F
EPON 1001F TDS
Pint, quart, gallon, 5 gallon. 55 gallon drum.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.