Filter
Tire Release Agent. Tire manufacturers will benefit from switch to our ReleaSys TM1 Tire Release Agent.

Tire Release Agent | ReleaSys™ TM1

ReleaSys™ TM1 is a high-performance, high cross-linking Tire Release Agent designed to be the most advanced Tire / Bladder release coating available. Part of a new generation of reactive polysiloxane chemistry, ReleaSys™ TM1 promotes highly efficient bladder release, providing better air evacuation, smoother slip,  durable release performance.

  • Exceptional release ease and friction reduction
  • Multi-release from a single application
  • No fillers; Optimized coating weight
  • Increased bladder life
  • Minimized buildup and fouling
CLICK HERE TO SEND INQUIRY OR REQUEST A QUOTE
Category: Tags: , , ,
CLICK HERE TO CHAT WITH AN EXPERT ABOUT THIS PRODUCT

Tire Release Agent | ReleaSys™ TM1

Next Generation Water based Release System, Maximizes releases per Application

ReleaSys™ TM1 Tire Release Agent is a high performance, crosslinking release system designed for Tire and Bladder Manufacturers. A highly advanced polymeric resin, ensures the coating bind tenaciously to surface. The result is increased ease of use, durability, and lower usage levels. ReleaSys™ TM1 promotes highly efficient bladder release, providing better air evacuation, smoother slip for improved bladder centering and durable release performance. ReleaSys TM1 Tire Release Agent also helps eliminate the start-up difficulties often associated with new bladders, and reduces defect and scrap. Application can be to the green tire or directly to the bladder.

Benefits of ReleaSys™ TM1 Tire Release Agent

  • Exceptional release ease and friction reduction
  • Multi-release from a single application
  • No fillers; Optimized coating weight
  • Increased bladder life
  • Improves quality and consistency of rubber parts
  • Minimized buildup and fouling

ReleaSys TM1: Surface Protection, Optimized Slip, Faster Start-ups

Miller-Stephenson tire release agent coatings protect the surface of the bladder against chemical and mechanical attack. Protecting the bladder against the high level of abrasion significantly improves bladder service life and reliability. ReleaSys TM1 tire curing bladder coatings also act as a barrier to help slow down the ingress of sulfur and other compounding ingredients in the bladder surface. Providing a barrier to the ingress of these materials helps to further increase bladder life by reducing bladder cracks in the vent lines. Customers report significant increases in bladder life after move to ReleaSys TM1. Increases up to 45% have been seen. An additional benefit provided by the TM1 is reduced start up issues often associated with new bladders. Our tire curing bladder release agents provide protection to the curing bladders throughout their service life and they will help enhance slip to improve tire uniformity and reduce defects.

Application Benefits of ReleaSys™ TM1

  • Improved appearance of the tire exterior due to ease of release
  • Reduced defect rate due to reduced surface abrasion, sulfur migration and oxidation effects
  • Increased bladder life due to better air evacuation, bladder centering, tire position
  • Operating cost reduction due to elimination of excessive spray application
  • Reduction of release agent costs by utilizing lower amounts per application

50+ years of Industry Expertise at your service

Miller-Stephenson has had a long history in Rubber and Tire molding industries, and our ReleaSys brand of products are respected around the world for quality and reliability. When you purchase Miller-Stephenson ReleaSys tire release agents you not only get industry leading products, you also gain access to our many years of direct production floor experience. We understand your production issues and can help you optimize your mold preparation, maintenance and release processes to improve your bottom line.

For help with application or troubleshooting concerns while using ReleaSys.

Click here for information, Which mold release agent is right for you

For further reading regarding our ReleaSys product line and Applications – our most helpful article for selecting the best product for your needs

The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.

Physical Properties:

Primary Polymer:……Crosslinking Polysiloxane
Appearance:…………White Emulsion
Odor:…………………None
Specific Gravity:…….1.0 g/mL @ 25°C
Flash Point…………..None

The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.

Recommended Application Procedure:

  1. The application surface should be clean and contaminate free. Ideal application is it to a warmed surface to accelerate the dry and curing time.
  1. ReleaSys™ TM1 can be applied by wiping, brushing or spray equipment that can produce fine atomization and deposit a uniform, thin film.

Note: New bladders should be treated with 2 coats with a full cure between each coat. Uniform, even application is critical. 

  1. Cure Method: Cure times vary with application thickness and temperature. The curing process is dramatically accelerated with the application of any heating above 50 °C. Cure times above 50 °C require approximately 20-30 minutes. Temperatures below 50°C are non-ideal.
  1. When the product is applied to a green tire, transfer will occur, applying a coating to the bladder surface.

The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.