Submit Quote
EPON 828
Undiluted Clear Difunctional Bisphenol A/Epichlorohydrin Derived Liquid Epoxy Resin, Highly Versatile Epon Resin
EPON 828 resin is an undiluted clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication and fusion technology. Miller-Stephenson is certified EPON™ 828 supplier and EPON 828 benefits include:
- Fiber reinforced pipes, tanks and composites
- Tooling, casting and molding compounds
- Construction, electrical and aerospace adhesives
- High solids/low VOC maintenance and marine coatings
- Electrical encapsulations and laminates
- Chemical resistant tank linings, flooring and grouts
- Base resin for epoxy fusion technology
EPON™ Difunctional Liquid Epoxy Resin are the most important products sold in the epoxy resin market, and one of the foundations of Hexion. The basis of the product line is EPON Resin 828, which is a liquid resin also described as diglycidyl ether of Bisphenol A. This key resin is complemented in the range by EPON™ Resin 862, the diglycidyl ether of Bisphenol F, and a full series of modified liquid epoxy resins, epoxy resin blends and purified epoxy resins.
EPON 828 General Information
The low viscosity and cure properties of EPON Resin 828 allow its use under various application and fabrication techniques including:
|
|
|
|
|
|
|
|
EPON 828 Application
EPON™ liquid epoxy resins when properly formulated and cured provide an inert end-product with a unique combination of properties. They are suitable for use in high performance applications such as coatings, adhesives, civil engineering, electronic and electrical insulation, composites and fiber sizing. Cured EPON™ resins are generally regarded as being high strength materials, since many commonly used systems provide tensile strengths greater than 10,000 psi and modulus values greater than 400,000 psi. One of the most widely recognized applications of cured EPON™ Resin 828 is strong adhesion to a broad range of substrates. Such systems exhibit shear strength of up to 6,000 psi (41 Mpa). One factor which contributes to this property is the low shrinkage shown by these systems during cure. Compared to other polymers, epoxy resins have low internal stresses resulting in strong and durable finished products.
Miller-Stephenson is an Epon 828 Supplier and certified from Hexion for direct distribution, technical support, and formulation modifications. For Technical Service Question please click here
Krytox™ is a trademark of The Chemours Company FC, LLC.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.