Submit Quote
Rubber Molding Release Agent | ReleaSys™ 8500
$98.58 – $166.65
Highly versatile, rubber molding release agent designed to exhibit superior durability and release. Advanced chemistry provides extended reapplication intervals, ideally suited for high-throughput rubber, fluorocarbon and elastomer molders.
- Optimized for Difficult Rubber/Elastomer molding
- Ideal for complexity molds
- High Release; No transfer
- Minimizes mold build-up and fouling
Rubber Molding Release Agent | ReleaSys 8500
Reliable Release of all Rubber Compounds; Multiple Releases Per Application; Zero Transfer
ReleaSys™ 8500 is a highly versatile water based, semi-permanent rubber molding release agent designed to exhibit reliable release of all rubber compounds without transfer or frequent applications. Properly applied, our product develops a long lasting film on the mold surfaces with minimal mold build-up. ReleaSys 8500 will not interfere with post production finishing operation.
Benefits of Rubber Molding Release Agents
- Exceptional release agent durability
- Ideal for all Rubber and Elastomeric Compounds
- Particularly Effective on Aggressive or Highly Abrasive Compounds
- Easy Demolding; No Transfer
- Increased Mold Cleanliness
- Resists mold build up and fouling
- Lower scrap rates and higher quality parts
Applications of ReleaSys 8500 Rubber Molding Release Agents
ReleaSys™ 8500 is recommended for releasing all natural and synthetic rubber compounds including highly aggressive compounds like FKM. Miller-Stephenson rubber molding release agent products chemically bond to mold surfaces ensuring the highest number of releases per application and resistance to abrasion. ReleaSys 8500 rubber release agent is ideal for rubber to metal bonding applications thanks to zero transfer. Application include:
- Highly Filled Rubber Compounds
- Aggressive Peroxide or Sulfur Cure Rubbers
- Fluorocarbon elastomers ( FKM, Viton, etc)
- High Compression or High Temperature Molding
- Mandrel Applications
Highly Efficient, Highly Cost-Effective – The best rubber molding release agent available.
Miller-Stephenson has developed the ReleaSys product line in an effort to offer a high efficiency, cost effective, and technologically advanced release agent to our customers. Our semi-permanent rubber mold release agents forms a chemical bond to the mold surface which results in exceptional surface adhesion, durability, and application efficiency. All variants of the ReleaSys™ Series will deliver higher productivity, lower rejection rates, and higher quality products even in the most demanding applications. We offer various slip-levels and have specialized formulations for differing polymer types and molding processes ( ie: injection, transfer, compression). Miller-Stephenson has developed ReleaSys formulations to be applicable in virtually all types of composites, elastomers and organic polymers.
Advanced Chemistry & Superior Durability – Optimized for Rubber and Elastomer Molding Operations
The application efficiency of ReleaSys can be seen by the relatively small amounts of rubber molding release agent that needs to be applied to the mold surface to give numerous releases. This small volume requirement means that storage space is reduced and cost per application is minimized. Products are formulated ready-to-use, making dilution equipment redundant. Overall, our mold release agents represent an added-value proposition that can be tailored to many types of molding applications. Miller-Stephenson has spent years improving and tailoring our rubber mold release agents to deliver the highest value proposition by increase efficiency, reducing over-application, and enhancing finished part quality and consistency.
For help with application or troubleshooting concerns while using ReleaSys™.
If you would like more information on which mold release agent is right for you click here
For further reading regarding our ReleaSys product line and Applications – our most helpful article for selecting the best product for your needs
For Bladder, Tire, And Green tire release agents and coating, see our Releasys TM1
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Physical Properties:
| Primary Polymer | Thermoset Polysiloxane |
| Appearance | White Emulsion |
| Odor | None |
| Specific Gravity | 1.0 g/mL |
| Flash Point | None |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| ReleaSys Sizes | Quart, 1 Gallon |
ReleaSys 8500-TDS
ReleaSys 8500-TDS
Product Overview-ReleaSys
Product Overview ReleaSys
Release Agent Applications:
ReleaSys 8500 is formulated to provide unmatched utility in injection and transfer molding with the following materials
| • Plastics | • Elastomers |
| • Fluoroelastomers | • EPDM |
| • Acrylics | • Epoxy |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
One Gallon, 5 Gallon, and 55 Gallon Drum
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.