Submit Quote
Electronic Cleaning Solvent | MS-720/720M/722
MS-720/720M/722 Electronic Cleaning Solvent is a precision cleaning solvent that safely and quickly cleans electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Removes oils, oxidation, and operating erosion dust. Safe for plastics including acrylic, polycarbonate, polystyrene and ABS.
- Compatible with most plastics, elastomers, and rubber
- Non-ozone depleting
- Cuts through oils and dust leaving no residue
MS-720/720M/722 | Electronic Cleaning Solvent
Electronic Solvent Cleaner and Flux Remover, Safe For Most Elastomers and Metals Including Zinc and Magnesium
MS-720/720M/722 Electronic Cleaning Solvent safely and quickly removes oils, oxidation, and operating erosion dust, flux, and more. Ideally suited for use on electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Safe for plastics including acrylic, polycarbonate, polystyrene, and ABS. Safe for most elastomers and metals including zinc and magnesium. Evaporates quickly, leaves no residue, and is ideal for rapid cleaning processes.
Advantages of using MS-720/722 Electronic Cleaning Solvent
- Evaporates quickly
- Leaves no residue
- Compatible with most plastics, elastomers, and rubber
- Non-ozone depleting
- RoHS2 Compliant
Available Sizes:
MS-720 (12 oz Aerosol)
MS-720M (8 oz Aerosol)
MS-722 (4 oz, 8 oz, Qt, Gal, 5G, 55G)
Properties of MS-720/722 Electronic Cleaning Solvent:
Boiling Point………………………………… 132ºF-147ºF/55ºC-64ºC
Liquid Density…………………..1.30 g/ml @ 70ºF/21ºC
Ozone Depletion……………………………………..0.00
VOC Content
Aerosol……………………………………………….128 gms / l
Bulk……………………………………………………162 gms / l
Plastic Compatibility:
(Immersion: 15 minutes at Room Temperature)
| · Acrylic | · Polyethylene |
| · Polypropylene | · Polycarbonate |
| · Polyester | · Epoxy |
| · PMMA | · PET |
| · Nylon | · ABS |
NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test MS-720/720M/722 Electronic Cleaning Solvent for compatibility before use.
Elastomer Compatibility:
(Immersion: 15 mins at Room Temperature)
- Butyl Rubber
- Nitrile
- EPDM
- Natural Rubber
NOTE: Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of the elastomers. Test MS-720/722 Electronic Cleaning Solvent for compatibility before use. For Technical Assistance please click here.
Metal Compatibility:
(Immersion: 15 mins @77°F/25°C)
- Aluminum
- Copper
- Stainless Steel
- Carbon Steel
- Brass
- Zinc
Note: Test for compatibility before use.
Why Choose Miller-Stephenson Solvents?
Not all industrial cleaners have kept pace with the increasing demands for purity and regulatory restrictions in high technology industries. Miller-Stephenson’s MS-720/722 Electronic Cleaning Solvent utilizes the most advanced, safest, and eco-friendly chemistry currently available. As electronic systems have become smaller and more complex, chemical purity has become even more critical. Today’s electronic components run hotter and are smaller, and more complex than ever before. This creates situations where dendritic expansion or corrosion can proliferate if the cleaning is not perfect. Miller-Stephenson offers ultra-high-purity, non-flammable, and high cleaning efficiency solvents for a variety of industries and specifications. We offer VOC exempt and low or no GWP based solvent systems to meet all current and future regulatory specifications. From Electronic, Aerospace, and Military to Vapor Degreasing applications, Miller-Stephenson has the right solution for your specific application and requirements.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
- Evaporates quickly
- Leaves no residue
- Compatible with most plastics, elastomers and rubber
- Non ozone depleting
- RoHS Compliant
| Boiling Point | 55°C |
| Liquid Density | 1.30 g/ml @ 21°C |
| Ozone Depletion | 0 |
| Aerosol VOC Content | 128 gms/l |
| Bulk VOC Content | 162 gms/l |
| Vapor Pressure | 105 mm Hg @ 25°C |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Technical Data Sheet
MS-720/720M/722
MS-720 (12 oz Aerosol)
MS-720M (8 oz Aerosol)
MS-722 (4 oz, 8 oz, Qt, Gal, 5G, 55G)
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.