Electronic Solvent Cleaner | MS-580N/582N
MS-580N/582N Electronic Solvent Cleaner is a nonflammable and economical solvent for critical cleaning of electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Ideal for removing oils, oxidation, and operating erosion dust.
- 100% Nonflammable
- Leaves No Residue
- Quickly Evaporates For Rapid Cleaning Process
- RoHS2 and RoHS3 Compliant
Send Inquiry for Electronic Solvent Cleaner | MS-580N/582N
MS-580N/582N | Electronic Solvent Cleaner
100% Nonflammable, High Performance Flux Remover, Excellent For Complex Geometries
MS-580N/582N Electronic Solvent Cleaner is a non-flammable, precision solvent for critical cleaning of electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Excellent for cleaning oils, grease, oxidation, and operating erosion dust. MS-580N/582N evaporates quickly and leaves no residue.
Advantages of MS-580N/582N Electronic Solvent Cleaner:
- Evaporates quickly
- Leaves no residue
- Nonflammable
- Non-ozone depleting
- RoHS2 and RoHS3 Compliant
Available Sizes:
MS-580N: Aerosol (12 oz.)
MS-582N: Quart, Gallon, 5-Gallon, 55-Gallon drum
Properties of Solvent of MS-580N/582N Electronic Solvent Cleaner:
Boiling Point………………………………… 122°F /50°C
Flash Point…………………………………….…….None
Liquid Density…………………..1.35 g/ml @ 77°F/25°C
Ozone Depletion……………………………………..0.00
VOC Content for MS-580N………………………….727 g/l
VOC Content for MS-582N………………………….928 g/l
Plastic Compatibility:
(Immersion: 15 minutes at Room Temperature)
| · Acetal | · Polyethylene |
| · Polypropylene | · Polyester, PBT, PET |
| · PEK, PEEK | · Epoxy-Phenolcs |
| · Polyimides | · Polyvinylchloride |
| · PTFE | · Liq. Crystal Polymer |
NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test MS-580N/582N Electronic Solvent Cleaner for compatibility before use.
Elastomer Compatibility:
(Immersion: 15 mins at Room Temperature)
| · Butyl Rubber | · Natural Rubber |
| · Polysulfide | · EPDM |
| · Buna S | · Buna N |
| · Neoprene | · Urethane |
| · Chlorosulfonated PE | · Silicone |
| · Viton™ |
NOTE: Elastomer swelling and shrinking will, in most cases, revert to within a few percent of the original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of elastomers. Test for compatibility before use. For Technical Assistance please click here.
Why Choose Miller-Stephenson Solvents?
Not all industrial cleaners have kept pace with the increasing demands for purity and regulatory restrictions in high technology industries. Miller-Stephenson’s MS-580N/582N Electronic Solvent Cleaner utilizes the most advanced, safest, and eco-friendly chemistry currently available. As electronic systems have become smaller and more complex, chemical purity has become even more critical. Today’s electronic components run hotter, are smaller and more complex than ever before. This creates situations where dendritic expansion or corrosion can proliferate if the cleaning is not perfect. Miller-Stephenson offers ultra-high-purity, non-flammable, and high cleaning efficiency solvents for a variety of industries and specifications. We offer VOC exempt and low or no GWP based solvent systems to meet all current and future regulatory specifications. From Electronic, Aerospace, and Military to Vapor Degreasing applications, Miller-Stephenson has the right solution for your specific application and requirements.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
- Evaporates quickly
- Leaves no residue
- Nonflammable
- Non ozone depleting
- RoHS Compliant
| Boiling Point | 36°C |
| Flash Point | None |
| Liquid Density | 1.32 g/ml @ 25°C |
| Ozone Depletion | 0 |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Technical Data Sheet
MS-580N / 582N
MS-580 (Aerosol)
MS-582 (Bulk Liquid)
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.