Water Removal Solvent Cleaner | MS-760/762

MS-760/762 | Water Removal Solvent Cleaner

Special Blend of a Hydrofluorocarbon Fluid and Isopropanol, Ideal For Cleaning Complex Geometrical Parts

MS-760/MS-762 Water Removal Solvent Cleaner is a special blend of a hydrofluorocarbon fluid and isopropanol. It is intended for use in the removal of water from nonporous surfaces, as well as cleaning particulate and ionic soils from component parts. MS-760/MS-762 offers solvency for polar soils while maintaining excellent compatibility with most plastics and metals. Typical applications include absorption drying, precision, and specialty cleaning and rinsing for removing particulates, fingerprints, and light soils, from metal, plastic and glass parts. It is an ideal choice for absorption drying where nested parts or complex geometries make water removal difficult or energy-intensive.

Advantages of using MS-760/MS-762 Water Removal Solvent Cleaner:

• Evaporates quickly
• Leaves no residue
• Nonflammable
• Compatible with most plastics, elastomers and
  metals
• Non-ozone-depleting
• RoHS Compliant

Available Sizes:

MS-760 (12 oz Aerosol)
MS-760M (8 oz Aerosol)
MS-762 (4 oz, 8 oz, Qt, Gal, 5G, 55G)

MS-762 (bulk): Vapor degreasing is suggested for optimum cleaning effectiveness. Modern vapor containment technology is recommended for both batch and in-line equipment. These systems have a higher freeboard and a secondary set of low temperature (-20°F/-29°C) condenser coils to greatly reduce vapor losses.

Physical Properties of MS-760/MS-762 Water Removal Solvent Cleaner:

(Measured @ 77°F, unless otherwise noted)
Boiling Point……………..………………………….…129°F/54°C
Liquid Density…………………………………..…………1.42 g/cc
Vapor Pressure………………………………..………..238 mmHg
Surface tension………………………………………..14.1 N/m
Viscosity……………………………………………………0.75 cPs
VOC Content
Aerosol………………… …………………………………110 gms / l
Bulk Liquid…………………. ……………………………142 gms / l

Plastic Compatibility:

(Immersion: 15 minutes at Room Temperature)

Polyethylene………. Acetal
Polyphenylene Oxide, PPO………. Epoxy
Polyester, PET, PBT………. Liquid Crystal Polymer
Polyimide, PI, PEI,PAI………. Phenolic
Polyetherketone, PEK………. PTFE, ETFE
Polyaryletherketone, PEEK………. CPVC, PVC
Polyarylsulfone………. Ionomer
Polypropylene………. Polysulfone
Polyphenylene Sulfide, PPS………. Polystyrene
ABS………… Acrylic
Cellulosic

Elastomer Compatibility of MS-760/MS-762 Water Removal Solvent Cleaner:

(Immersion: 15 mins at Room Temperature)

Metal Compatibility

(2 weeks at 212°F/100°C in sealed tubes)

• Zinc
• Aluminum
• Brass
• Stainless Steel
• Copper

Large amounts of water may extract alcohol and affect cleaning performance. Therefore, to reduce alcohol loss, use desiccant dryers rather than water separators in the condensate return line. Contact with highly basic process materials, pH 10 or above, is not recommended.

Why Choose Miller-Stephenson Solvents?

Not all industrial cleaners have kept pace with the increasing demands for purity and regulatory restrictions in high technology industries. Miller-Stephenson’s MS-760/762 Water Removal Solvent Cleaner utilizes the most advanced, safest, and eco-friendly chemistry currently available.  As electronic systems have become smaller and more complex, chemical purity has become even more critical. Today’s electronic components run hotter, are smaller and more complex than ever before. This creates situations where dendritic expansion or corrosion can proliferate if the cleaning is not perfect. Miller-Stephenson offers ultra-high-purity, non-flammable, and high cleaning efficiency solvents for a variety of industries and specifications.  We offer VOC exempt and low or no GWP based solvent systems to meet all current and future regulatory specifications. From Electronic, Aerospace, and Military to Vapor Degreasing applications, Miller-Stephenson has the right solution for your specific application and requirements. Please Click Here for Technical Assistance.