Submit Quote
Waterborne Epoxy Resins | EPI-REZ 3522-W-60
Non-ionic, Aqueous Dispersion of a Solid Bisphenol A Epoxy Resin, No Organic Solvents
EPI-REZ 3522-W-60 is a nonionic, aqueous dispersion of a solid bisphenol A epoxy resin similar to EPON™ Resin 1002F, with an epoxide equivalent weight of 550 to 650 and a Durran’s melting point of 75 to 85 °C. EPI-REZ Resin 3522-W-60 is supplied at a moderate viscosity and is mechanically stable. No organic solvents are present. EPI-REZ 3522-W-60 is completely water reducible, providing for a wide latitude in viscosity reduction. This dispersion is thixotropic; therefore, viscosity readings vary with the spindle speed of the viscometer.
General Information
EPI-REZ 3522-W-60 offers a solvent-free approach to the formulation of film adhesives, fiberglass reinforced plastics, chemical resistant pipe, and electrical dip coatings and varnishes. In addition, EPI-REZ Resin 3522-W-60 can be used in the formulation of coatings where conventional solvent based epoxy resins are normally used. EPI-REZ 3522-W-60 can also be used in formulations which are traditionally water based and require improved chemical and water resistance. Examples of such applications are fiber finishes and industrial textile applications. EPI-REZ 3522-W-60 can be cured through both epoxy functionality and hydroxyl functionality. Curing agents most conveniently employed are those which are water soluble or dispersible and are stable in an aqueous medium. Examples of such curing agents include dicyandiamide, various substituted imidazoles, aliphatic and aromatic amines, melamine resins, and ureaformaldehyde resins. When applied at room temperature, EPI-REZ 3522-W-60 does not form a continuous film after evaporation of the water. However, upon the application of heat (~170 °F) the resin system will readily coalesce to a smooth coating.
EPI-REZ 3522-W-60 Sales Specification
| Property | Units | Value | Test Method/Standard |
| Weight per Epoxide | g/eq | 615 – 715 | ASTM D1652 |
| Viscosity | cP | 8,000 – 18,000 | ASTM D-2196 |
| Solids | % | 58.5 – 60.5 | ASTM D-1259 |
| pH | 7 – 9 | ASTM E-70 |
Typical Properties
| Property | Units | Value | Test Method/Standard |
| Pounds/Gallon | lb/gal | 9.2 | |
| Solvent | Water | ||
EPI-REZ 3522-W-60 Safety, Storage & Handling
Please refer to the MSDS for the most current Safety and Handling information.
Please refer to the Momentive website for Shelf Life and recommended Storage information. For ease of handling and optimum shelf life,epoxy dispersions should be stored in tightly sealed containers at temperatures between 50°F(10°C) and 100°F(37.8°C).Do not allow the product to freeze. To prevent skinning or surface drying,do not leave the product uncovered for extended periods of time.If the need arises to store partially filled drums,replace the plastic top-sheet on to the surface of the liquid product. Exposure to these materials should be minimized and avoided, if feasible, through the observance of proper precautions, use of appropriate engineering controls and proper personal protective clothing and equipment,and adherence to proper handling procedures. None of these materials should be used, stored,or transported until the handling precautions and recommendations as stated in the Material Safety Data Sheet (MSDS)for these and all other products being used are understood by all persons who will work with them. Information and MSDS’s on non-Momentive products should be obtained from the respective manufacturer.
Sizes Available
Available in quart, gallon, 5 gallon, and 55 gallon drum sizes.
Miller-Stephenson: Lubrication Experts, Superior Chemistry, Fast Delivery – a potent combination
At Miller-Stephenson, we understand the challenges engineers and scientists face with trying to select the best lubricant for current or new applications. With over 60 years of real-world experience, our highly trained team of technical experts and field engineers can assist you with identifying and selecting the optimal lubricant that best fits your operational parameter. Our large inventory of high-performance PFPE-base Krytox™ lubricants from Chemours, ensures we have the right lubricant for your needs, regardless of temperature, environment, safety, or performance of your system demands. For further information please review the articles below or contact a Miller-Stephenson representative.
For the Krytox Frequently asked questions (FAQ) click here.
Krytox™ is a trademark of The Chemours Company FC, LLC.
Technical Support
Please refer to the TDS for more technical information.
If you require any further technical or application support please contact our technical staff
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.