Low Global Warming Dry Lubricant | MS-122ADX

MS-122ADX | Low Global Warming Dry Lubricant

High-Performance Dry Lubricant; Excellent Long Term Corrosion Protection, Safe on All Surfaces

Miller-Stephenson MS-122ADX Dry Lubricants uses advanced dry lube fluoropolymer chemistry to create a proprietary white, waxy particle dispersion of PTFE. This dry lubricant applies an ultra-thin layer of dry lubrication to surfaces. The long-lasting PTFE coating provides a low coefficient of friction and corrosion protection in all applications, including high temperatures & pressures.  Additionally, the122ADX was developed to help answer some of the new regulations being proposed and implemented in the USA, Europe, and Canada. The outstanding lubricity and low coefficient of friction of PTFE is perfect for use as a dry film lubricant and as a release agent in molding operations.

Benefits of MS-122ADX PTFE Dry Lubricant

• Exclusive PTFE Dry Lubricant Coating
• No Oily Residue and does not attract dust, oil or particulates
• Low coefficient of friction & elimination of slip-stick issues
• Safe for application to rubbers, plastics, composites, etc.
• Protects and extends tool life
• Effective Lubrication from -50°F to 500°F
• Combats friction, and surface fouling, minimizes build-up
• Compatible with all substrates and does not swell/degrade elastomers
• Meets environmental restrictions of Europe and Canada

Applications of MS-122ADX as a Dry Lubricant

The MS-122ADX is a PTFE dry lubricant that is excellent for all applications. The formulation of this dry lubricant allows for it to be used on all surfaces, providing a very uniform coating, especially where there is metal-to-metal contact. The applied film offers excellent corrosion and high-temperature protection and lubrication. The coating is also safe for direct application to rubbers, elastomers, plastics, and other sensitive surfaces. Coupled with the use of No ODC (ozone-depleting chemicals), no HFC propellants or solvents (hydrofluorocarbons), and lower VOC. The MS-122ADX is a great choice for your production process.

Application of MS-122ADX as a Release Agent

MS-122ADX is an excellent, general-purpose release agent. Light-duty release needs are the ideal use for this product. Ideal for use on rubber or silicone molds. Providing a very uniform coating, the MS-122ADX can be used on a wide variety of materials with virtually no transfer. By heat fusing our MS-122ADX, you can significantly help increase the durability and cost-effectiveness of your molding applications.

Why choose MS-122ADX | PTFE Dry Lubricant

Production engineers looking for lightweight, faster drying lubricants, or non-silicone-based release agents will find a great alternative with the PTFE formulated MS-122ADX PTFE dry lubricants. Engineers will find that they can use the MS-122ADX across a broad range of substrates, with the added benefits of this product being chemically inert, non-transferable, rapid drying, self-leveling, and all with the assurances of low global warning characteristics. Additionally, PTFE, on a release-per-application basis is significantly more efficient and cost-effective than sacrificial or PVA alternatives.

Variations of the MS-122 Series will deliver higher productivity, lower rejection rates, and higher-quality products. Miller-Stephenson’s specialized chemical formulations offer a variety of custom solutions that will give you high performance for your molding process. Please contact one of our technical support teams for more information.

Enhanced Dry Lubrication, Release Coatings, Exceptional Customer Service & Tech Specialist

Miller-Stephenson also has an expansive line of optimized products that utilize PTFE dry lubricant in the formulation for mold release, dry lube, and additive applications for unique and more definitive applications. For any assistance with the proper application of our dry lubricants, storage, or general technical assistance, please see the links below or call our technical service line. Miller-Stephenson has a team of experts ready to help you. Our pedigree in the dry film and molding industry and relationship with molding operations both large and small provide our technical team with a dynamic perspective, and we hold the skills and experience needed to make sure your molding operation is cost-effective, efficient, and most importantly, safe.

Technical or Application Support

• Learn more about PTFE Dry Lubricants:  PTFE Dry Film Mold Release Agents– Article
• Learn more about our line of MS-122 Dry Film Lubricants:  Dry Film Lubricant Aerosols – Article
• Finding the right Mold Release Agent:  Mold Release Agent Chemistries: Which is right for you?– Article
• For any technical or application support please contact us:  Technical Support – Contact