Submit Quote
Heavy Duty Solvent & Flux Remover | MS-555/557 |
Removes Organic Flux, Ionic Salts and Oil.
Our most aggressive flux remover. An, economical and superior solvent for flux removal and heavy duty cleaning. Suitable for removing oil, ionic salts and particulate matter. Removes all types of organic flux. Excellent for spot flux removal. Ideal for field service, production and prototype work. Evaporates quickly and leaves no residue.
MS-555 (Aerosol) MS-557 (Bulk Liquid) | Heavy Duty Solvent & Flux Remover
Removal Of Ionic Salts & Particulate Matter With Heavy Duty Solvent
Our most aggressive flux remover and cleaning solvent. This cleaning agent is suitable for removing oil, ionic salts, and particulate matter. Ideal for field service, production, and prototype work. Evaporates quickly and leaves no residue behind. It replaces n-PB and HCFC-225 in many applications.
Advantages of MS-555/557 Heavy Duty Solvent & Flux Remover
- Evaporates quickly
- Leaves no residue
- Non ozone-depleting
- RoHS Compliant
Properties
Boiling Point………………………………… 95°F/34°C
Liquid Density…………………..1.28 g/ml @ 77°F/25°C
Ozone Depletion……………………………………..0.00
Plastic Compatibility
(Immersion: 15 minutes at Room Temperature)
- Acetal
- Polyethylene
- Polypropylene
- Liquid Crystal Polymer
- Polyester, PBT, PET
- Epoxy
- Polysulfone, PSO
- PEK, PEEK
- Polyimides
- PTFE
- Phenolic
- Polyvinylchloride
NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test the compatibility of MS-555 & MS-557 Heavy Duty Solvent & Flux Remover before use.
Elastomer Compatibility
(Immersion: 15 mins at Room Temperature)
- Butyl Rubber*
- Natural Rubber
- Polysulfide
- EPDM
- Buna S*
- Buna N
- Neoprene*
- Urethane
- Chlorosuflonated PE
- Silicone
- Fluoroelastomers
*Swelling, but with low extractables.
Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of the elastomers. Test the compatibility of MS-555 & MS-557 Heavy Duty Solvent & Flux Remover before use.
Metal Compatibility
(Immersion: 2 weeks at 248°F/120°C)
- Aluminum
- Copper
- Iron
Note: Test MS-555 Heavy Duty Solvent & Flux Remover for compatibility before use.
60+ Plus Years of Experience in the Composite/Electronic Industry – at your service.
At Miller-Stephenson, we not only understand the challenges that electronic and composite manufacturers face, but we also recognize the diversity of raw materials utilized in the process. Although these processes are always changing, our products offer superior performance, safety, and easy use. Our complete line of heavy duty solvents and flux removers provide manufacturers with non-flammable options, VOC-compliant products, and new products offering ultra-low global warming content. Miller-Stephenson prides itself on providing distinctive, robust, formulated products, developed to serve your requirements and positively affect the efficiency of your process, the quality of your products, and your operational costs. For any further technical service questions or concerns please contact our technical support team. For Technical Assistance please click here.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Boiling Point | 95°F |
| Liquid Density | 1.28 g/ml @77°F |
| Ozone Depletion | 0 |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
MS 555/557 PDF
Technical Data Sheet
- Removes Organic Flux
- Ionic Salt & Oils
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Aerosol (MS-555) | Bulk (MS-557) |
| 14 oz. | 4 oz. |
| 8 oz. | |
| Quart | |
| Gallon | |
| 5 Gallons | |
| 55 Gallons |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
- No ODC
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.