Flux Remover Spray | H0805A/H0B05B
Removes Organic Flux, Oils, Grease and Wax
A strong, nonflammable cleaning agent containing an azeotrope blend of hydrofluoroethers with trans-1,2-dichloroethylene and isopropyl alcohol. It is ideally suited for removal of rosin, organic flux, oils, grease and waxes. Can be used for precision and specialty cleaning. Recommended for use in vapor degreasing equipment. Evaporates quickly and leaves no residue. Low GWP (global warming potential). No ODC (ozone depleting chemicals).
Send Inquiry for Flux Remover Spray | H0805A/H0B05B
H0805A/H0B05B | Flux Remover Spray
Strong, Nonflammable, Aerosolized Flux Remover, Replaces nPB and HCFC-225 In Many Applications
A strong nonflammable flux remover spray containing a blend of hydrofluoroethers with trans-1, 2 dichloroethylene and isopropyl alcohol. This mixture is a blend of azeotropes and is ideally suited for removal of rosin, organic flux, oils, grease and waxes. Can also be used for precision and specialty cleaning. Evaporates quickly and leaves no residue. H0805B can be used in a vapor degreaser. It replaces nPB and HCFC-225 in many applications.
Advantages of Miller-Stephenson Flux Remover Spray
- Evaporates quickly
- Leaves no residue
- Nonflammable
- Non ozone depleting
- RoHS Compliant
Properties of Solvent
Boiling Point……………………………………………..113°F/45°C
Vapor Pressure………………………………………….360 mm Hg
Liquid Density………………………….1.27 g/ml @ 70°F/21°C
Ozone Depletion…………………………………………………..0.00
Global Warming Potential, H0805A……………………….35.6
H0805B……………………….43.0
Plastic Compatibility
(Immersion: 15 minutes at Room Temperature)
- Acetal
- Polyethylene
- Polypropylene
- Liquid Crystal Polymer
- Polyester, PBT, PET
- Epoxy
- Polysulfone, PSO
- PEK, PEEK
- Polyimides
- PTFE
- Phenolic
- Polyvinylchloride
NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test for compatibility before use.
Flux Remover Spray Elastomer Compatibility
(Immersion: 15 mins at Room Temperature)
- Butyl Rubber*
- Natural Rubber
- Polysulfide
- EPDM
- Buna S*
- Buna N
- Neoprene*
- Urethane
- Chlorosuflonated PE
- Silicone
- Fluoroelastomers
Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of the elastomers. Test for compatibility before use.
Metal Compatibility
(Immersion: 2 weeks at 248°F/120°C)
- Aluminum
- Copper
- Iron
Note: Test for compatibility before use.
60+ Plus Years of Experience in the Composite/Electronic Industry – at your service.
At Miller-Stephenson, we not only understand the challenges that electronic and composite manufactures face, we also recognize the diversity of raw materials utilized in the process. Although these processes are always changing, our products offer superior performance, safety, and easy use. Our complete line of flux remover spray provides manufacturers with non-flammable options, VOC-compliant products, and new products offering ultra-low global warming content. Miller-Stephenson prides itself on providing distinctive, robust, formulated products, developed to serve your requirements and positively affect the efficiency of your process, the quality of your products, and your operational costs. For any further technical service questions or concerns please contact our technical support team. For Technical Assistance please click here.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
- Evaporates quickly
- Leaves no residue
- Nonflammable
- Non ozone depleting
- RoHS Compliant
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
- Flux Remover
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
H0805A (10 oz Aerosol)
H0805B (4 oz, 8 oz, Qt, Gal, 5G, 55G)
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.