Submit Quote
Electronic Flux Remover | MS-550N / MS-552N
MS-550N / MS-552N is a 100% nonflammable, cleaning solvent and flux remover. Ideal for critical cleaning of electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Well suited for removing and cleaning oils, flux, and particulate matter from complex assemblies.
- 100 % Nonflammable
- Plastic Compatibility
- Leaves No Residue
- Easily Removes Oils, Flux, and Particulate Matter
MS-550N / MS-552N | Electronic Flux Remover
Nonflammable, Cleaning Solvent and Flux Remover, Replaces HCFC-225 in Many Applications
Description:
MS-550N / MS-552N Electronic Flux Remover is a nonflammable, cleaning solvent and flux remover for critical cleaning of electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Well suited for cleaning oils, flux, and particulate matter from complex assemblies. MS-550N / MS-552N Electronic Flux Remover evaporates quickly and leaves no residue. It replaces HCFC-225 in many applications. MS-550N / MS-552N Electronic Flux Remover. Benefits Include:
- Evaporates quickly
- Leaves no residue
- Nonflammable
- Non-ozone depleting
- RoHS Compliant
Available Sizes:
MS-550N: Aerosol (12 oz.)
MS-552N: Quart, Gallon, 5-Gallon, 55-Gallon drum
Properties of MS-550/MS552N Electronic Flux Remover:
Boiling Point………………………………… 122°F /50°C
Flash Point…………………………………….…….None
Liquid Density…………………..1.35 g/ml @ 77°F/25°C
Ozone Depletion……………………………………..0.00
Plastic Compatibility:
(Immersion: 15 minutes at Room Temperature)
| · Acetal | · Polyethylene |
| · Polypropylene | · Polyester, PBT, PET |
| · PEK, PEEK | · Epoxy-Phenolcs |
| · Polyimides | · Polyvinylchloride |
| · PTFE | · Liq. Crystal Polymer |
NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test MS-550/ MS-552N Electronic Flux Remover for compatibility before use.
Elastomer Compatibility:
(Immersion: 15 mins at Room Temperature)
| · Butyl Rubber | · Natural Rubber |
| · Polysulfide | · EPDM |
| · Buna S | · Buna N |
| · Neoprene | · Urethane |
| · Chlorosulfonated PE | · Silicone |
| · Viton™ |
NOTE: Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of the elastomers. Test for compatibility before use. For Technical Assistance please click here.
Why Choose Miller-Stephenson Solvents?
Not all industrial cleaners have kept pace with the increasing demands for purity and regulatory restrictions in high technology industries. Miller-Stephenson’s MS-550/ MS-552N Electronic Flux Remover utilizes the most advanced, safest, and eco-friendly chemistry currently available. As electronic systems have become smaller and more complex, chemical purity has become even more critical. Today’s electronic components run hotter, are smaller and more complex than ever before. This creates situations where dendritic expansion or corrosion can proliferate if the cleaning is not perfect. Miller-Stephenson offers ultra-high-purity, non-flammable, and high cleaning efficiency solvents for a variety of industries and specifications. We offer VOC exempt and low or no GWP based solvent systems to meet all current and future regulatory specifications. From Electronic, Aerospace, and Military to Vapor Degreasing applications, Miller-Stephenson has the right solution for your specific application and requirements.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Properties of Solvent:
Boiling Point………………………………… 122°F /50°C
Flash Point…………………………………….…….None
Liquid Density…………………..1.35 g/ml @ 77°F/25°C
Ozone Depletion……………………………………..0.00
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
MS-550N / MS-552N
TDS
Ideal for Heavy Duty Applications and Electrical Cleaning: A nonflammable, cleaning solvent and flux remover for critical cleaning of electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Well suited for cleaning oils, flux and particulate matter from complex assemblies.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
MS-550N: Aerosol (12 oz.)
MS-552N: Quart, Gallon, 5-Gallon, 55-Gallon drum
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.