Submit Quote
Electrical Contact Cleaner | MS-530N/532N Contact Re-Nu®
An economical, powerful cleaning agent that restores electrical or mechanical continuity on all types of contacts. Removes oxides, oil, grease and dust from electrical contacts, relays, encoders, slide wires, rheostats, distribution panels and switching devices. Evaporates quickly and leaves no residue. No ODC (ozone-depleting chemicals). Utilizes Miller-Stephenson’s proprietary cleaning technology and 100% non-flammable, low odor solvent blend.
- High Effective Cleaning Agent
- 100% Nonflammable; Low Odor
- Leaves No Residue
- RoHS Compliant
MS-530N/532N Contact Re-Nu® | Electrical Contact Cleaner
Highly Effective Cleaning Agent, Fully Restores Electrical Contacts
MS-530N Contact Re-Nu Electrical Contact Cleaner that restores electrical or mechanical continuity on all types of contacts. Excellent for cleaning oxides, oil, grease, and dust from contacts, switches, relays, tuners, encoders, slide wires, rheostats, distribution panels, and servomechanisms. MS-530N Contact Re-Nu MS-530N evaporates quickly and leaves no residue. Utilizes Miller-Stephenson’s proprietary cleaning technology non-flammable, low odor solvent blend.
Advantages of using MS-530N/532N Contact Re-Nu® Electrical Contact Cleaner
- High effective cleaning agent
- Evaporates quickly
- 100% Nonflammable; low odor
- Leaves no residue
- RoHS compliant
MS-530N Contact Re-Nu is an electrical contact cleaner that has a high cleaning efficiency Kb value, while maintaining complete compatibility with most plastics, metals and elastomers, and sensitive electronic components.
Sizes Available
MS-530N Contact Re-Nu®- Aerosol
MS-532N Contact Re-Nu®- Bulk
| Aerosol | Glass | Pail |
| 8 oz. | Quart. | 5 Gallons |
| 12 oz. | 1 Gallon | 55 Gallons |
Plastic Compatibility
(Immersion: 15 minutes at Room Temperature)
| · Acetal | · Polyethylene |
| · Polypropylene | · Polyester, PBT, PET |
| · PEK, PEEK | · Epoxy-Phenolcs |
| · Polyimides | · Polyvinylchloride |
| · PTFE | · Liq. Crystal Polymer |
NOTE: Acrylics, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test for compatibility before use.
Elastomer Capability
(Immersion: 15 mins at Room Temperature)
| · Butyl Rubber | · Natural Rubber |
| · Polysulfide | · EPDM |
| · Buna S | · Buna N |
| · Neoprene | · Urethane |
| · Chlorosulfonated PE | · Silicone |
| · Viton™ | Fluorosilicones |
NOTE: Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of the elastomers. Test for compatibility before use.
Metal Compatibility
(Immersion: 2 weeks at 99°F/37°C)
- Aluminum
- Copper
- Iron
- Gold
Note: Test for compatibility before use.
Why Miller-Stephenson?
Not all industrial cleaners have kept pace with the increasing demands for purity and regulatory restrictions in high technology industries. Miller-Stephenson’s specialty solvents utilize the most advanced, safest, and eco-friendly chemistry currently available. As electronic systems have become smaller and more complex, chemical purity has become even more critical. Today’s electronic components run hotter, are smaller and more complex than ever before. This creates situations where dendritic expansion or corrosion can proliferate if the cleaning is not perfect. Miller-Stephenson offers ultra-high-purity, non-flammable, and high cleaning efficiency solvents for a variety of industries and specifications. We offer VOC exempt and low or no GWP based solvent systems to meet all current and future regulatory specifications. From Electronic, Aerospace, and Military to Vapor Degreasing applications, Miller-Stephenson has the right solution for your specific application and requirements. For any technical service issues please contact our experienced staff here
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Typical Properties | |
| Boiling Point | 98°F |
| Liquid Density | 1.33 g/ml @ 77°F |
| Ozone Depletion | 0 |
| VOC Content of MS-530 | 437 g/l |
| VOC Content of MS-532 | 375g/l |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
Technical Data Sheet
MS-530N/532N
- Connector Cleaner
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.
| Aerosol | Glass | Pail |
| 8 oz. | Quart. | 5 Gallons |
| 12 oz. | 1 Gallon | 55 Gallons |
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.