When it Comes to Lubricants, the Lowest Price isn’t Always the Best Value
Krytox Drives Savings
Machine failures occur for a variety of reasons. Each one of these failures creates a ripple effect of costs and productivity loss. Some of these issues can be mitigated by choosing a high-performance lubricant – one that can withstand time and harsh environments. While high-performance lubricants are more expensive initially, the added expenditure is recovered through reduced breakdowns, downtime and maintenance costs, which drives savings.
Find Compatibility and Productivity with High-Performing Krytox (PFPEs)
High-performance perfluoropolyether (PFPE) lubricants are inert, water and oil repellant, solvent resistant, nonflammable, non-toxic, and compatible with most common elastomers, plastics and metals. This unique chemistry enables them to outlast and outperform conventional hydrocarbon. Krytox lubricants perform under extreme temperatures, extreme pressure and exposure to harsh chemicals.
Significantly Reduce Re-lubrication Intervals & Drives Savings
It’s common practice to use hydrocarbon or silicone-based lubricants to re-lube components on a daily, weekly or monthly basis. With Krytox, that need is greatly reduced, freeing personnel for other tasks and minimizing downtime caused by the need to replace worn out components. Following are a few examples of Krytox driving performance, value and reducing downtime.
Krytox can Generate Savings
One copper rod manufacturer believed lubricating its rollers’ bearings (operating temperatures over 200 °C [400 °F]) every four hours with a synthetic hydrocarbon grease was the longest lasting solution available. However, by switching to a PFPE lubricant, they lowered re-lubrication to a monthly interval and cut annual bearing failures by nearly 98% (reducing replacements from 186 bearings each year to four). By switching to Krytox, this manufacturer reduced maintenance costs, parts costs and production downtime. A cost analysis showed a total annual savings of $66,920.
Krytox Can Extend Service Life & Drives Savings
A U.S. textile manufacturer utilizes a hot flue drying oven as part of its process. In the drying oven, wet fabric passes along many bearing rolls inside a large metallic box, moving through nine heated zones with temperatures reaching 218 °C [425°F]. The company was replacing at least six bearings per month due to premature bearing failures. Frequent downtime was adversely affecting productivity. Worse, fabric quality was compromised. The manufacturer needed a lubricant that would retain its integrity at high temperatures in high humidity environments. After using a high-temperature Krytox grease, the manufacturer experienced a significant extension of bearing service life, minimizing costly downtime.
Krytox Can Limit Hazards
A polyethylene manufacturer was struggling with maintenance costs and frequent shutdowns of its high-capacity, sealed centrifuge because of hazardous material exposure. Specifically, a mineral oil lithium thickened grease, used in the centrifuge bearings, leaked and led to premature bearing failures. The leaking hazardous solvent created an additional exposure threat to workers. The new lubricant needed to be non-reactive and insoluble to hexane, provide enough adhesion to avoid leaks, and remain fluid enough to deliver the required lubrication. The manufacturer turned to Krytox. Since doing so, unplanned shutdowns and re-lubrication have both been reduced – with re-lubrication down to twice a year. These dramatic results decreased maintenance costs and increased worker safety and Drives Savings.
About Krytox™ PFPE Lubricants
Krytox™ lubricants are Chemours’ line of high quality PFPE oils and greases, which have been proven to offer long term performance and superior value. These lubricants are PFPEs, resulting in exceptional chemical stability. Therefore, they are thermally stable, nonflammable and insoluble in water, acids, bases, and most organic and all non-fluorinated solvents. Additionally, Krytox™ lubricants are ISO 9001 and ISO 14001 certified, and several grades are NSF H-1.
The attributes of Krytox™ lubricants include:
Drives Savings : Performance over a wide temperature range
Extreme heat or cold have no effect on the lubricity of these lubricants, effective from -75 °C to greater than 400 °C (-103 °F to 752 °F), depending upon operating conditions and product grade. Resistant to chemical attack Krytox™ lubricants withstand oxygen, acids and other aggressive substances.
Krytox™ lubricants – within the recommended temperature ranges – experience almost zero evaporation or chemical changes over the many years of a machine’s service life.
Krytox™ lubricants won’t harm painted surfaces or most elastomeric materials. They are compatible with almost every material they may contact.
The information set forth herein is furnished free of charge and based on technical data that Chemours believes to be reliable. Chemours makes no warranties, express or implied, and assumes no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents or trademarks.
Krytox™ is a trademark of The Chemours Company FC, LLC.
The recommendation made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent.