fbpx

ptfe

Showing all 13 results

Other GPL

Krytox GPL 246

This special grade of Krytox has been formulated with copper powder in grease to act as a conductor of electricity. Krytox oils provide long life and high-temperature stability and lubrication. The addition of copper powder also improves the thermal conductivity of the grease for applications where improved heat transfer is needed; however, it can increase bearing noise and wear. Because GPL 246 is formulated with our Krytox GPL 106 base oil, it retains many of the properties of that oil. Krytox Authorized Distributor

MORE INFO

MS-122AD was developed as an efficient, economical and universal release agent and dry lubricant. This formulation contains a high lubricity, low molecular weight PTFE fluoropolymer specialized for mold release and dry lubricant applications.  A nonflammable, non-ozone depleting carrier solvent / propellant mixture ensures all environmental regulations are met.

MORE INFO

PTFE Aerosol (MS-122)

MS-122AV | PTFE release agent

MS-122AV combines high-efficiency low-molecular weight polytetrafluoroethylene (PTFE) and proprietary surface activation chemistry.  This formulation yields superior adhesion of PTFE to metallic, glass, and non-plastic surfaces. The result is unmatched durability, extended reapplication intervals and virtually no transfer.   MS-122AV advantages include:

  • Unparalleled release agent durability
  • Ideal for difficult mold geometries
  • Improves quality and consistency of molded parts
  • Nonflammable; Non-ozone depleting formulation
  • Non-migrating; Non-staining

MORE INFO

PTFE Aerosol (MS-122)

MS-122SE | PTFE Mold Release Agent

MS-122SE is a high performance, high solvency mold release agent utilizing PTFE fluoropolymers (polytetrafluoroethylene) specifically designed for unsurpassed adhesion to mold surfaces and extended durability. The proprietary solvent blend ensures that proper wetting, leveling, and surface preparation occurs when applied yielding a durable, uniform thin-film.  MS-122SE offers the following benefits:

  • Superior adhesion to mold surfaces
  • High Solvency/Rapid Evaporating Carrier Fluid
  • Ideal for compression/injection molding
  • Nonflammable; Non-ozone depleting formulation
  • Non-migrating; Non-staining

MORE INFO

PTFE Aerosol (MS-122)

MS-122XD | PTFE Dry-Film Lubricant

MS-122XD was designed as an efficient, durable, and universal dry film lubricant with superior release and non-stick characteristics. Has the fastest dry time of all the products in the 122 series with the most refined final ultra-thin film properties

MORE INFO

PTFE Bulk Liquid (MS-143)

MS-143XD | Dry Film Mold Release Agent

MS-143XD is a versatile and robust release agent / dry lubricant, which utilizes a rapidly drying, VOC exempt carrier solvent to enhance throughput and production efficiency. The formulation contains a high lubricity, low molecular weight PTFE fluoropolymer designed to not interfere with posting finishing operations.  MS-143XD offers the following benefits:

  • Efficient, consistent release of molded parts
  • Outstanding lubricity and minimization of slip-stick
  • VOC exempt formulation
  • Nonflammable, Non-ozone depleting
  • Non-migrating; Non-staining

MORE INFO

PTFE Bulk Liquid (MS-143)

RA/IPA DryFilm Dispersion

Chemours™ RA/IPA DryFilm Dispersion are extremely stable PTFE dispersions which provide unmatched lubricity, anti-stick, anti-fouling and mold release properties in an ultra thin-film coating. Used extensively as release agents in processes involving the molding of rubber, plastic, and urethane parts, Chemours™ DryFilm dispersions have a low coefficient of friction that also translates into superior effectiveness as a dry lubricant. This dispersion can also be added to paint and coating formulations to provide added anti-stain, anti-fouling, and high slip properties.

MORE INFO

ReleaSys 82 is an aerosolized water-based, semi-permanent dry film mold release agent designed to provide reliable, consistent release across a broad range of moldable substrates.  Properly applied, our product develops a durable, thin-film on the mold surface with minimal mold build-up.  ReleaSys 82 will not interfere with post-production finishing operation. Benefits of this product include:

  • High durability; Surface activation chemistry
  • Ideal for lower complexity molds
  • Ideal for Rubber to Metal Bonding
  • Improves quality and consistency of molded parts

MORE INFO

ReleaSys™ 8200 is a water-based, semi-permanent dry film release agents designed to provide reliable, consistent release across a broad range of moldable substrates. Excels at compression and transfer molding.  Properly applied, our product develops a durable, thin-film on the mold surface with minimal mold build-up.  ReleaSys 8200 will not interfere with post-production finishing operation. Benefits of this product include:

  • High durability; Surface activation chemistry
  • Ideal for Silicone-based molding
  • Ideal for Rubber to Metal Bonding
  • Thermally Stable (>550°F)
  • Clean, Non-oily, Non-migrating

MORE INFO

ReleaSys™ DFX Semi-Permanent Release Spray is Miller-Stephenson's most advanced PTFE DryFilm release system, providing the unmatched performance of our ReleaSys™ DF in the convenience of a aerosol spray can.  Our proprietary formulation provides not only superior performance but the product is specifically tuned to matched the performance of professional HVLP spray equipment. Customers using the ReleaSys DFX get the performance of a bulk release system and the uniform/thin-film coating of a professional spray system, in a convenient aerosol can. Benefits include:

  • Next-Generation PTFE Thin-Film Coating
  • Superior Spray Pattern and DryFilm Technology
  • Efficient, Reliable, and Predictable Release Performance
  • Ideal for Epoxies, Composites, and Plastics
  • 100% Non-Silicone, Oil, and Wax

MORE INFO

TriboSys Thin Film Lube contains Krytox GPL oils, which are packaged into convenient eight or fourteen ounce aerosols. This packaging provides an easy solution for lubricating hard to reach places with pinpoint accuracy. The low surface tension of the solvent carries the oil into tight crevices. Also available with Krytox grease.

  • Nonflammable; Thin film technology
  • Chemically Inert
  • Ideal for difficult geometries
  • Non-migrating; Non-staining

MORE INFO

TriboSys MS-110XNB lubricants contain Krytox GPL oils and a low surface solvent that carries the oil to travel into tight crevices. With a wide operating temperature range (-94°F to 550°F), TriboSys is chemically inert, non-migrating, insoluble in hydrocarbons, water, steam, solvents,and disinfectants.

  • Thin Film Generation
  • Nonflammable
  • Chemically Inert
  • Extends component service life

MORE INFO

TriboSys aerosol lubricant contains Krytox GPL greases (PFPE oil thickened with PTFE), low surface tension of the solvent carries the grease into tight crevices with pinpoint accuracy. Packaged into convenient eight or fourteen ounce aerosol cans providing an easy solution for lubricating hard to reach places. Benefits include:

  • Oxygen Compatible
  • Chemically Inert
  • Wide operating temperature range (-94°F to 550°F)
  • Nonflammable

MORE INFO