non-flammable

Showing all 8 results

Silicone Conformal Coating

MS-460H | Silicone Conformal Coatings

Miller-Stephenson's Silicone Conformal Coating is a transparent, soft, flexible coating which offers excellent moisture resistance, good dielectric properties, and excellent light transmission capabilities for solar applications.  It has good weatherability and resistance to U.V. light and dirt pick-up.  This coating can be "solder-through" for easy repair. Contains Dow Corning 1-2577 silicone resin. This silicone resin meets the requirements of MIL-I-46058C, Type SR, IPC-CC-830B and  UL 746E approva. It is also compatible with WEEE and RoHS.

MORE INFO

Silicone Conformal Coating

MS-462H

Miller-Stephenson’s Silicone Conformal Coating is a transparent, soft, flexible coating which offers excellent moisture resistance, good dielectric properties, and excellent light transmission capabilities for solar applications.  It has good weatherability and resistance to U.V. light and dirt pick-up.  This coating can be “solder-through” for easy repair. Contains Dow Corning 1-2577 silicone resin. This silicone resin meets the requirements of MIL-I-46058C, Type SR, IPC-CC-830B and  UL 746E approva. It is also compatible with WEEE and RoHS.

MORE INFO

Acrylic Conformal Coating

MS-467C

Miller-Stephenson’s Acrylic Conformal Coating is a non-flammable, tough, fast drying, abrasion resistant coating providing protection against caustics and corrosives. The methacrylate copolymer resin offers excellent resistance to water, alcohol, dilute acids & alkalis, chemical fumes and corrosive or oxidizing environments. It offers excellent weatherability and superior abrasion resistance. The resin water-white in color and transparency, with high gloss and hardness which is solderable for ease of repair.

MORE INFO

Urethane Conformal Coating

MS-470C | Urethane Conformal Coatings

Miller-Stephenson's Urethane Conformal Coating offers superior toughness and abrasion resistance and excellent protection from humidity and organic solvents. Urethane resins are very hard and resistant to mechanical wear, their hardness is second only to epoxy conformal coatings. However urethanes are much easier to be reworked than an epoxy. Miller-Stephenson's Urethane Conformal Coating have the following benefits:

  • Superior toughness and abrasion resistance
  • Reworkable and room temperature cure
  • Solvent and discoloration resistant
  • Fluorescent under UV light
  • No cracking or crazing with vibration

MORE INFO

Urethane Conformal Coating

MS-472C | Urethane Coating

Miller-Stephenson’s Urethane Conformal Coating offers superior toughness and abrasion resistance and excellent protection from humidity and organic solvents. Urethane resins are very hard and resistant to mechanical wear, their hardness is second only to epoxy conformal coatings. However urethanes are much easier to be reworked than an epoxy. Miller-Stephenson’s Urethane Conformal Coating have the following benefits:

  • Reworkable and room temperature cure
  • Solvent and discoloration resistant
  • Fluorescent under UV light
  • No cracking or crazing with vibration
  • Superior toughness and abrasion resistance

MORE INFO

Acrylic Conformal Coating

MS-475C | Acrylic Conformal Coatings

Miller-Stephesons' Acrylic Conformal Coating offers superior toughness and abrasion resistance, excellent dielectric properties, fungal resistance, and moisture and environmental protection. Our formulation is 100% non-flammable. Printed circuit boards covered with acrylic coatings are repairable.  Simply heat the coating with a soldering iron to remove the components. MS-475C will cover 6.4 sq. ft. at a 2 mil. thickness per 14 oz. aerosol can.  

MORE INFO

Acrylic Conformal Coating

MS-477C | Acrylic Conformal Coating

Miller-Stephesons’ Acrylic Conformal Coating offers superior toughness and abrasion resistance, excellent dielectric properties, fungal resistance, and moisture and environmental protection. Our formulation is 100% non-flammable. Printed circuit boards covered with acrylic coatings are repairable.  Simply heat the coating with a soldering iron to remove the components. MS-477C, the bulk liquid version will cover 91 sq. ft. per gallon at a 2 mil. thickness when applied via dip, brush, or spray  

MORE INFO

ReleaSys 8900 is a solvent-based, semi-permanent mold release agent designed to provide superior durability and high slip across a broad range of moldable substrates. This formulation is particularly effective on difficult molding application or abrasive substrates.  Properly applied, our product develops a durable, thin-film on the mold surface with minimal build-up. Benefits of this product include:

  • Exceptional durability and surface adhesion
  • High Slip;Ideal for complex mold geometries
  • Ideal for Composites and Urethanes
  • Fast evaporation and cure time
  • Minimal mold build up

MORE INFO