Medical Device Coating | ShieldSys™ SB

Medical Device Coating | ShieldSys™ SB

Superior Lubricity, Durability, and Abrasion Resistance

ShieldSys™ SB Medical Device Coating is high advanced fluoropolymer medical device coating designed specifically to provide extremely low coefficient of friction and mitigate “slip-stick” non-release issues. Minimizes build-up and fouling and imparts an ease cleaning surface to medical devices. This coating utilizes a proprietary PTFE fluoropolymer resin system designed to generate a highly durable, abrasion resistant, and chemically inert thin film (5-10 microns) coating on the applied surface. ShieldSys™ SB is a water based, dry film coating designed to fit easily into medical device manufacturers operations, this product can be applied via spray, dip, or brush to surfaces. ShieldSys™ SB medical device coating is high temperature and autoclave stable.

Benefits of ShieldSys™ SB Medical Device Coating

• Exceptional durability and abrasion resistance
• Low coefficient of friction; High Lubricity
• Minimization of “slip-stick” issues
• Chemically Inert; Autoclave stable
• Clean, Non-oily, Non-migrating
• Eliminates build-up and fouling
• Stable to all forms of sterilization

Fluoropolymer Medical Device Coating, Water-based Formulation, Thin-Film Technology

ShieldSys™ SB is formulated to provide excellent utility and performance on numerous medical devices and tool applications which require a dry film, highly lubricious, and anti-fouling surface coating.

Surface Preparation

1. Surface preparation is important for all application methods. All surfaces should be clean and dry before ShieldSys™ SB dispersion’s are applied. Controlling surface roughness improves coverage, especially in air-dried applications; a smooth surface can improve results. Properly applied, ShieldSys™ SB dispersion coatings are not affected by water or other materials with which they come in contact.

Application Methods:

1. Dipping: Dipping is useful for coating small devices. Coatings levels are determined by concentration of solids, rate of withdrawal, and number of applications. A single application is typically sufficient.

2. Brush: This method is especially useful in coating continuous surfaces such as rods, tubes, or flat sheets. In addition, wiping and brushing are ideal for coating specific areas of a larger part.

3. Spraying: Dilution with DI water is typically necessary. Spray coating can be performed by any equipment which can generate fine atomization and deposit uniform, light coats of material.

Melting-Coating for Improved Adhesion: Medical device coating

Adhesion of the coating can be improved by melting the deposited solids. After the dilute dispersion’s are applied and the solvent is allowed to evaporate at room temperature, the surface can be heated to fuse the coating. The temperature for heat-curing the coating is 340–360°C (644–680°F). When melt coating ShieldSys ™ SB dispersion’s, provide adequate ventilation. Heat curing the coating is completed as follows:

1. Measure the surface temperature directly with a thermocouple. You may observe a change in coating appearance, which may alter initially from an opaque white to a darker, translucent look and then appear clear and wet.

2. Maintain the temperature of the coated surfaces (not the temperature of the ambient air) at the correct temperature for 5–10 minutes.

3. If a white residue is left on the metal surface, buff with a soft cloth

Why use ShieldSys™ SB Medical Device Coating?

Our next generation medical device coating allows manufactures to provide improved, reliable, and consistent performance.  Our coatings utilize proprietary fluoropolymer resin and binder technology deliver superior adhesion and durability in a operator friendly water based system. Miller-Stephenson’s ShieldSys SB medical device coating provides excellent adhesion and corrosion protection on a variety of substrates (including low temperature metallic alloys, high temperature plastics, etc) while maintaining an extremely low coefficient of friction. These coatings are the path forward for companies who want to stay ahead of the Regulatory restriction of Chromium-6 while enhancing consistency, surface adhesion, and minimizing coefficient of friction. For additional medical products, please see TriboSys™ MDF | Medical Dry lubricant, TriboSys™ Biocompatible Lubricants,  MS- 4000 –  Surgical Skin Degreaser Plus.

Related Article Links

TriboSys™ | Biocompatible Medical Device Lubricants

TriboSys™ | Endoscope Lubricants Medical Oils & Greases

Krytox Wikipedia

Miller-Stephenson does not endorse or claim suitability of its products for specific medical applications. It is the responsibility of the medical device or equipment manufacturer to determine that the MS product is safe, lawful, and technically suitable for the intended use. Miller-Stephenson makes no warranties, express or implied, concerning the suitability of any MS product for use in medical applications.