No Clean Flux Remover | MS-560/MS-562

 MS-560/MS-562 | No Clean Flux Remover

Our Best No Clean Flux Remover, Leaves No Residue

Our best no clean flux remover and heavy duty cleaner. It is nonflammable and suitable for removing no-clean flux as well as oil, ionic salts, and particulate matter. Ideal for field service, production, and prototype work. Evaporates quickly and leaves no residue.

Advantages of MS-560 & MS-562 No Clean Flux Remover:

• Evaporates quickly
• Leaves no residue
• Non Flammable
• Non ozone depleting
• RoHS Compliant

Solvent Properties

Boiling Point…………………………….…… 99°F/37°C

Flash Point……………………………………….….None

Liquid Density…………………..1.25 g/ml @ 77°F/25°C

Ozone Depletion…………………………….………..0.00

Plastic Compatibility

(Immersion: 15 minutes at Room Temperature)

• Acetal
• Polyethylene
• Polypropylene
• Liquid Crystal Polymer
• Polyester, PBT, PET
• Epoxy
• Polysulfone, PSO
• PEK, PEEK
• Polyimides
• PTFE
• Phenolic
• Polyvinylchloride

NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test for compatibility of MS-560 & MS-562 No Clean Flux Remover before use.

Elastomer Compatibility

(Immersion: 15 minutes at Room Temperature)

• Butyl Rubber*
• Natural Rubber
• Polysulfide
• EPDM
• Buna S*
• Buna N
• Neoprene*
• Urethane
• Chlorosuflonated PE
• Silicone
• Fluoroelastomers

*Swelling, but with low extractables.

Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of elastomers.

Metal Compatibility

(Immersion: 2 weeks at 248°F/120°C)

• Aluminum
• Copper
• Iron

Note: Test for compatibility before use. This product is non flammable, odorless, and has a low order of toxicity.

60+ Plus Years of Experience in the Composite/Electronic Industry – at your service.

At Miller-Stephenson, we not only understand the challenges that electronic and composite manufacturers face, we also recognize the diversity of raw materials utilized in the process. Although these processes are always changing, our No Clean Flux Remover offers superior performance, safety, and easy use. Our complete line of Flux Removing Solvents provides manufacturers with non-flammable options, VOC-compliant products, and new products offering ultra-low global warming content. Miller-Stephenson prides itself on providing distinctive, robust, formulated products, developed to serve your requirements and positively affect the efficiency of your process, the quality of your products, and your operational costs. For any further technical service questions or concerns please contact our technical support team. For Technical Assistance please click here.